Customs:Minor services (no ontology)

From Mazeworld

(Redirected from Customs:Minor)

Here is the list of all services offered by the Maze Customs of lesser importance than ammunition and weapon family modifications. The majority of these services are conversion services, which modify or add features to existing firearms.

NOTE: ALL weapons acquired via such services are not listed on any database, and are not considered Crafting weapons as they were not obtained via crafting from a blueprint.

Total weapon conversions

A service where an engineer will use firearms or firearm parts to manufacture new, unique firearms, unobtainable anywhere else. 100% custom and quality guaranteed!

Vollmer HK51-B

The resulting weapon is touted as one the shortest, and lightest LMGs in the Mazes, yet it is still ferociously powerful thanks to the 7.62x51mm NATO chambering. As an added bonus, a threaded barrel is offered free of charge, compatible with standard muzzle devices.

  • Name: Vollmer HK-51B
  • Class: Class 2
  • Category: Machine gun
  • Caliber: 7.62x51mm NATO
  • Barrel length: 8.9 inches
  • Action: Semi/Full
  • Weight: 9 units
  • Feeding: HK21 belts
  • Stock type: RS (Retracting)
  • AutoROF: 8
  • Firearm maintenance stats: DV-2 RV-2
  • Accessory compatibility:
    • Muzzle: Threading (Standard)
    • Optics: HK claw mount, short [HK-S]

LMG11

The resulting weapon is a much enhanced version of the G11K2 assault rifle, in the form of a light machine gun fed with an unique 300-round cassette. With a mere 18 weight, this makes it one of the most ammunition-weight efficient machine guns of the Mazes, and it can be further enhanced with an enhancement service (see below).

  • Name: LMG11
  • Class: Class 1
  • Category: Machine gun
  • Caliber: 4.73x33mm Caseless
  • Barrel length: 27 inches
  • Action: Semi/Full
  • Weight: 18 units
  • Feeding: LMG11 ammo cassette, 300-round
  • AutoROF: 4
  • Stock type: S (Fixed)
  • Firearm maintenance stats: DV+1 RV-2
  • Accessory compatibility:
    • Optics: Reflex sight(Integrated)

XM2XI "X-Shotgun"

The resulting weapon seems similar to the original Benelli M2, except for the massive 25-round magazine, more than tripling the original weapon's capacity. Nobody knows what the purpose of this prototype shotgun is - some say it's for hardcore competition shooting, others say it's the ultimate hunting shotgun, and a vocal minority believes it to be simply way too overkill for anything serious. (Is there such a thing as "too overkill"?) Whatever it is, we just think it's awesome. In addition to the ridiculous new magazine, if they weren't already installed (M2 Super 90 Enhanced), a few extra bells and whistles have been installed.

  • Name: XM2XI "X-Shotgun"
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 21 inches
  • Action: Semi
  • Weight: 22 units
  • Feeding: Internal tube, 25 rounds, +1
  • Stock type: S (Fixed)
  • Firearm maintenance stats: DV+4 RV+3
  • Accessory compatibility:
    • Muzzle: Threading(Standard)

Full-auto conversions

A service which converts a typically semi-automatic only weapon into a fully-automatic or a select-fire one, via the addition of auto sears, drop-in conversion units, or other methods to transform the weapon.

Handguns

Converts semi-automatic handguns into fully automatic-capable handguns (the exact modes are listed below). Aside from fire mode and name, the resulting weapons are otherwise identical to their regular counterparts, and unobtainable elsewhere. The weapon category of the converted weapons is listed between parentheses, along with the AutoROF stat. Furthermore, all of those conversions cost 100 P$ apiece.

Rifles

Converts semi-automatic rifles into fully automatic-capable rifles (the exact modes are listed below). Aside from fire mode and name, the resulting weapons are otherwise identical to their regular counterparts, and unobtainable elsewhere. The weapon category of the converted weapons is listed between parentheses, along with the AutoROF stat Furthermore, all of those conversions cost 300 P$ apiece.

Shotguns

Converts semi-automatic shotguns into fully automatic-capable shotguns (The modes are listed below). Aside from fire mode and name, the resulting weapons are otherwise identical to their regular counterparts, and unobtainable elsewhere. Weapon category remains the same (Shotgun). The AutoROF stat is listed between parentheses. Furthermore, all of those conversions cost 300 P$ apiece.

Model conversions

Converts an existing, semi-automatic only firearm NOT belonging to one of the major families, into a select-fire counterpart, OR vice-versa, via replacement of the trigger group, fire selector unit, and any other relevant parts. Those conversions cost 250 P$ apiece and in either way (from semi to select-fire, or the other way around).

Minor rechamberings

Rechambers an existing, semi-automatic only firearm NOT belonging to one of the major families, to fire another caliber.

All rechambering services cost 400 P$.

Standard services

Special services

CAWS Shell conversion service

Convert your favorite 12 gauge shotgun to use the devastating, 3 inch, brass-hulled 12 gauge CAWS shotgun shells!

Each of these services costs 500 P$. Please note that besides caliber, no other weapon trait is modified - not even capacity.

  • Benelli M2 Super 90 3-Gun -> M2 Super 90 CS
  • Benelli M3 Super 90 Convertible -> M3 Super 90 CS
  • Benelli M4 Super 90 -> M4 Super 90 CS
  • Chiappa Triple Threat -> Triple Crisis CS
  • IZHMEKH Baikal MP-27M -> MP-27M CS
  • Mossberg 500 Cruiser -> M500C CS
  • Mossberg 500 Persuader -> M500P CS
  • Mossberg 590A1 -> M590A1 CS
  • Remington 870 Marine Magnum -> R870 CS
  • Remington 870 MCS -> R870 MCAWS
  • Remington Spartan 220 sawed-off -> CS-220 sawed-off (also known as Classic Super Shotgun)
  • Serbu Super-Shorty -> Super-Shorty CS

Light Battle Rifle service

Convert your 7.62x51mm NATO rifle to .260 Remington! No new magazines required - .260 Rem cartridges fit in all 7.62 NATO magazines! All LBR converted rifles are, aside new caliber, otherwise identical to their original counterparts. Any one conversion costs 400 P$.

SUB-2000 service

Adapt your Kel-Tec SUB-2000 to any of your needs! The original SUB-2000, with the suffix -G9, indicates that it is chambered in 9x19mm Parabellum and accepts Glock 9mm magazines. However, and for 150 P$, your SUB-2000 can be modified to suit your needs; this service includes rechambering and magazine well modifications, in order to accept other calibers and magazine types. The list of possible modifications is detailed below:

  • SUB-2000 B9: 9x19mm Parabellum, accepts Beretta 92 magazines
  • SUB-2000 B40: .40 S&W, accepts Beretta 96 magazines
  • SUB-2000 B357: .357 SIG, accepts Beretta 96 magazines
  • SUB-2000 G40: .40 S&W, accepts Glock .40/.357 magazines
  • SUB-2000 G357: .357 SIG, accepts Glock .40/.357 magazines
  • SUB-2000 M40: .40 S&W, accepts S&W M&P magazines
  • SUB-2000 M357, .357 SIG, accepts S&W M&P magazines
  • SUB-2000 S9, 9x19mm Parabellum, accepts SIG P226 9mm magazines
  • SUB-2000 S40, .40 S&W, accepts SIG P226 .40/.357 magazines
  • SUB-2000 S357, .357 SIG, accepts SIG P226 .40/.357 magazines

Minor barrel configurations

Modifications to the barrel of a firearm NOT belonging to one of the major families, in order to offer a range of different barrel lengths.

  • DWM Luger P08 -> Luger LP08 (Replaces the stock 4" barrel with a 8" barrel. Weight: 3 -> 5.)
  • IMI Desert Eagle Mark XIX 357 -> Desert Eagle 357 Long Barrel (Replaces the stock 6" barrel with a 10" long barrel. No change to weight.)
  • IMI Desert Eagle Mark XIX 44 -> Desert Eagle 44 Long Barrel (Replaces the stock 6" barrel with a 10" long barrel. No change to weight.)
  • IMI Desert Eagle Mark XIX 50 -> Desert Eagle 50 Long Barrel (Replaces the stock 6" barrel with a 10" long barrel. No change to weight.)
  • Ohio Ordnance HCAR -> HCAR LB (Replaces the stock 16" barrel with a 20" barrel. Weight: 26 -> 30.)
    • HCAR FA -> HCAR LBFA (Replaces the stock 16" barrel with a 20" barrel. Weight: 26 -> 30.)
  • SIG Arms SG551 -> SG551-LB (Replaces the stock 14.29" barrel with a 17.67" long barrel. Weight: 14 -> 18.)
  • SilencerCo Maxim 9 -> Maxim 9 Short (Shortens part of the silencer by about 30mm. Weight: 5 -> 3.)
    • Maxim 9 FA -> Maxim 9 Short FA (Shortens part of the silencer by about 30mm. Weight: 5 -> 3.)

FN SCAR rifles

  • FN Herstal SCAR-L CQC (10" barrel, Class 2 Weight 14):
    • SCAR-L STD (14" barrel, Class 1 Weight 14)
    • SCAR-L LB (18" barrel, Class 1 Weight 18)

Any of the SCAR-L variants can be converted to any other (the stock CQC model or either the STD or LB models proposed here).

Minor stock configurations

A service which adds, modifies, or removes shoulder stocks from non-Family firearms.

Pistol conversions

These modifications transform pistols and autopistols into pistol carbines and small submachine guns. Any such conversion costs 350 P$.

  • Beretta 93R -> 93R Carbine (Attaches a metal FS (Folding) stock. Remains Class 3. Weight: 3 -> 5.)
    • Weapon type is Auto pistol when the stock is folded, and Submachine gun when the stock is open, with appropriate changes to necessary weapon skills.
  • DWM Luger P08 -> Luger P08 Carbine (Attaches a wood S (Fixed) stock. Weight: 3 -> 5.)
    • Weapon type becomes Conventional rifle.
  • Luger LP08 -> Luger LP08 Carbine (Attaches a wood S (Fixed) stock. Becomes Class 2. Weight: 5 -> 9.)
    • Weapon type becomes Conventional rifle.
  • FN/Browning Hi-Power -> Hi-Power Carbine (Attaches a wood S (Fixed) stock. Weight: 3 -> 5.)
    • Weapon type becomes Conventional rifle.
  • H&K MP5K -> MP5K-PDW (Attaches a polymer FS (Folding) stock. Becomes Class 2. No change to weight.)
    • Weapon type doesn't change and remains Submachine gun.
  • H&K VP70 -> VP70M (Attaches a polymer S (Fixed) stock. Becomes Class 2. Adds the capability to do three-round burst fire (Burst3). Weight: 3 -> 5.)
    • Weapon type becomes Submachine gun.
  • KBP OTs-33 Pernach -> Pernach Carbine (Attaches a metal FS (Folding) stock. Remains Class 3. Weight: 3 -> 5.)
    • Weapon type is Auto pistol when the stock is folded, and Submachine gun when the stock is open, with appropriate changes to necessary weapon skills.
  • Mauser C96 Red 9 -> C96 Red 9 Carbine (Attaches a wood S (Fixed) stock. Becomes Class 2. Weight: 3 -> 5.)
    • Weapon type becomes Conventional rifle.
  • Molot Plant Stechkin APS -> Stechkin Carbine (Attaches a wood S (Fixed) stock. Becomes Class 2. Weight: 3 -> 5.)
    • Weapon type becomes Submachine gun.
  • Taiyuan Arsenal Shanxi Type 17 -> Shanxi Carbine (Attaches a wood S (Fixed) stock. Becomes Class 2. Weight: 5 -> 9.)
    • Weapon type becomes Conventional rifle.

Shotgun conversions

  • Winchester Model 1887 sawed-off -> Model 1887 Classic (Attaches a wood S (Fixed) stock. Becomes Class 1. Weight: 14 -> 18.)
    • Weapon type doesn't change and remains Shotgun.

Other minor configurations

Modifications which do not fit in any other category.

H&K USP modifications

These modifications are specifically designed for the H&K USP pistol series (USP-9, USP-40, USP-45), as well as the Customs-converted USP-357.

All of these modifications can be applied in any combination, unless indicated otherwise.

  • USP-xx Match (Replaces the stock 4.25" barrel with a 6" compensated barrel. Adds an integrated muzzle brake, no change to weight.) - 300 P$
  • One of two "Comp" modifications (one must be selected, the two cannot be installed at the same time):
    • USP-xx Comp-DS (Installs an integrated red dot sight) - 600 P$
    • USP-xx Comp-RS (Installs an integrated reflex sight) - 600 P$

Nomenclature (USP)

  • With both the Match and one of the two Comp modifications, the name nomenclature is: USP-xx Match Comp-yy.

M1 Garand modifications

These modifications are specifically designed for the M1 Garand rifle.

All of these modifications can be applied in any combination, unless indicated otherwise.

  • EBR Custom tactical conversion - 250 P$
  • T26 Tanker Garand short barrel modification - 100 P$
  • T20 select-fire + magazine well modification - 500 P$
  • One of two rechambering options:
    • Mark 2 conversion to 7.62x51mm NATO (retains M1 Garand en-bloc clip usage) - 500 P$
    • LBR conversion to .260 Remington (retains M1 Garand en-bloc clip usage) - 600 P$

M1 Garand EBR Custom

Replaces the Garand's old frame and stock with the lightweight aluminium, steel and polymer EBR frame, with retractable stock, pistol grip, and long accessory rails. In addition, a threaded barrel is installed, for compatibility with standard muzzle devices.

Modifications applied:

  • Weight: Weight tier -1 from base weapon
  • Stock type: RS (Retractable)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), M5 bayonet
    • Optics: NATO rail [NATO]
    • Light mounts: 2, large
    • Underbarrel interface: Long

T26 Tanker Garand

The Garand's 24 inch barrel and matching front handguard are replaced with the T26 version, better known in the real world as the "Tanker Garand". The shorter T26 barrel (18.5 inch long) allows the venerable Garand rifle to retain all of its semi-automatic, clip-fed glory, but in a shorter and handier package, allowing the weapon to be lighter and more maneuverable.

Modifications applied:

  • Barrel length: Reduced to 18.5 inches
  • Weight: Weight tier -1 from base weapon

T20 Garand

Thought the Garand needed more firepower? Remove the old, fixed internal magazine, forget about the en-bloc clips (sorry, ping enthusiasts!), and get the rifle fitted with a select-fire option and a magazine from a M1918 BAR, and you get the monstrous T20 Garand, a .30-06 Springfield battle rifle, capable of 650 rounds per minute in full-auto mode!

Modifications applied:

  • Action: Changed to Semi/Full (AutoROF 5)
  • Feeding: Changed to BAR magazines, +1

M1 Garand rechambering options

If, for some reason, you want your M1 Garand to shoot something other than .30-06 Springfield, you have two options: The Mark 2 conversion, or the LBR conversion.

Modifications applied:

Note: Unless the T20 modification is also applied (see below), a rechambered M1 Garand may still use Garand en-bloc clips; it can simply be loaded with ammunition of the chosen caliber instead of .30-06 Springfield.

Special combinations

  • T20 + Mark 2 or LBR: If a M1 Garand receives both the T20 (select fire + mag-fed conversion) modification and one of the rechambering options, the M1 Garand will no longer be compatible with BAR magazines. Instead, the Contestant is offered a choice of compatibility with either BM59 magazines or M14 magazines.

Nomenclature (Garand)

Unmodified weapon: Springfield M1 Garand

1 step modifications:

  • M1 Garand + EBR = M1 Garand EBR Custom
  • M1 Garand + T26 = T26 Tanker Garand
  • M1 Garand + T20 = T20 Garand
  • M1 Garand + Mark 2/LBR = M1 Garand Mark 2 / M1 Garand LBR

2 step modifications:

  • M1 Garand + EBR + T26 = M1 Garand Tanker EBR Custom
  • M1 Garand + EBR + T20 = M1 Garand T20 EBR Custom
  • M1 Garand + EBR + Mark 2/LBR = M1 Garand Mark 2 EBR Custom / M1 Garand ELBR Custom
  • M1 Garand + T26 + T20 = M1 Garand T20 Tanker
  • M1 Garand + T26 + Mark 2/LBR = M1 Garand Tanker Mark 2 / M1 Garand Tanker LBR
  • M1 Garand + T20 + Mark 2/LBR = M1 Garand T20 Mark 2 / M1 Garand T20 LBR
    • Affectionately known as: "I swear it's not a BM59!"

3 step modifications:

  • M1 Garand + EBR + T26 + T20 = M1 Garand T20 Tanker EBR Custom
    • Affectionately known as: "Super Mall Ninja Garand"
  • M1 Garand + EBR + T26 + Mark 2/LBR = M1 Garand Tanker Mark 2 EBR Custom / Garand Tanker ELBR Custom
  • M1 Garand + T26 + T20 + Mark 2/LBR = M1 Garand T20 Tanker Mark 2 / M1 Garand T20 Tanker LBR

4 step modifications:

  • M1 Garand + EBR + T26 + T20 + Mark 2/LBR = M1 Garand T20 Tanker Mark 2 EBR Custom / M1 Garand T20 Tanker ELBR Custom
    • Affectionately known as: "Super Mall Ninja Garand - "Not an M14, I swear" edition"

Trench Magazine service

These modifications are destined to bolt-action rifles, and are intended to greatly increase their magazine capacity.

Each of these services cost 250 P$.

  • Enfield SMLE No.4 Mk.I -> SMLE Trench (Installs a 20-round magazine)
  • Enfield SMLE No.4 Mk.I(T) -> SMLE Sniper Trench (Installs a 20-round magazine)
  • Mosin-Nagant M1891 -> Mosin-Nagant M1891 Raven (Installs a 10-round magazine)
  • Mosin-Nagant M44 -> Mosin-Nagant M44 Raven (Installs a 10-round magazine)
  • Mosin-Nagant M91/30 PU -> Mosin-Nagant M91/30 PU Raven (Installs a 10-round magazine)
  • Mosin-Nagant Obrez -> Obrez Raven (Installs a 10-round magazine)
  • Mauser Karabiner 98k -> Kar 98k Trench (Installs a 20-round magazine)
  • Springfield M1903A3 -> M1903A3 AS (Installs a 25-round magazine)
  • Springfield M1903A4 -> M1903A4 AS (Installs a 25-round magazine)

Tactical conversions

Modifications to firearm models, such as lighter chassis and frames, accessory rails, adjustable stocks, varying barrel lengths, and more. Depending on the firearm, modifications proposed may vary greatly.

All tactical conversions retain their original firearms' firearm maintenance (DV/RV) statistics.

M14 EBR Custom

Replaces the M14's old wood frame and stock with the lightweight aluminium, steel and polymer EBR frame, with retractable stock, pistol grip, and long accessory rails. In addition, a threaded barrel is installed, for compatibility with standard muzzle devices.

Resulting weapon:

  • Name: M14 EBR Custom
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 7.62x51mm NATO
  • Barrel length: 22 inches
  • Action: Semi/Full
  • Weight: 22 units
  • Feeding: M14 magazines, +1
  • Stock type: RS (Retractable)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), M6 bayonet
    • Optics: NATO rail [NATO]
    • Light mounts: 2, large
    • Underbarrel interface: Long

M1A EBR Custom

Same modifications as on the M14 EBR Custom, but on the semi-automatic only variant.

Resulting weapon:

  • Name: M1A EBR Custom
  • Class: Class 1
  • Category: Conventional rifle
  • Caliber: 7.62x51mm NATO
  • Barrel length: 22 inches
  • Action: Semi-auto
  • Weight: 22 units
  • Feeding: M14 magazines, +1
  • Stock type: RS (Retractable)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), M6 bayonet
    • Optics: NATO rail [NATO]
    • Light mounts: 2, large
    • Underbarrel interface: Long

SKS Custom

Replaces the SKS's old wooden frame with a modified Intrafuse frame, with retractable stock, pistol grip, a top rail for optics, a threaded barrel, and a larger 20-round internal magazine. Note that the SKS Custom still has the SKS integral bayonet it was originally equipped with.

  • Name: SKS Custom
  • Class: Class 1
  • Category: Conventional rifle
  • Caliber: 7.62x39mm
  • Barrel length: 20 inches
  • Action: Semi-auto
  • Weight: 18 units
  • Feeding: Internal magazine, 20 rounds, no +1 - compatible with SKS stripper clips. (Similarly to weapons such as the SMLE, needs 2 10-rd stripper clips to be fully reloaded.)
  • Stock type: RS (Retracting)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), SKS integral bayonet (integrated)
    • Optics: NATO rail, short [NATO-S]

L85A2 Enhanced

Installs the 2006 style upgrade package on the L85A2, replacing the handguard with a quad railed one, making it compatible with more accessories. In addition, a threaded barrel is installed free of charge.

  • Name: L85A2 Enhanced
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 5.56x45mm NATO
  • Barrel length: 20.4 inches
  • Action: Semi/Full
  • Weight: 18 units
  • Feeding: STANAG magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO rail, short [NATO-S]
    • Light mounts: 2, large
    • Underbarrel interface: Long

G36 Enhanced

The original dual optics carry handle is replaced with a railed flat top, similar to the G36C's. The handguard is also replaced with a full size quad-railed handguard, which is sufficiently long for installing an UGL. In addition, a threaded barrel is installed, free of charge.

  • Name: G36 Enhanced
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 5.56x45mm NATO
  • Barrel length: 18.9 inches
  • Action: Semi/Full
  • Weight: 18 units
  • Feeding: G36 magazines, +1
  • Stock type: FS (Folding)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), G36 bayonet
    • Optics: NATO rail [NATO]
    • Light mounts: 2, large
    • Underbarrel interface: Long

AUG A3 Enhanced

The original receiver of the Steyr AUG A1, which houses the integrated optic, is replaced with a modernized variant with a full-length NATO rail with integrated iron sights. In addition, the barrel assembly is replaced as well, favoring a 16 inch barrel over the original 20 inch one and offering a threaded barrel, but retaining the integrated foregrip. The result is a rifle that is not only even more customizable than the original AUG A1 was, but is so compact, it is no longer a Class 1 weapon but a Class 2 instead!

  • Name: AUG A3 Enhanced
  • Class: Class 2
  • Category: Combat rifle
  • Caliber: 5.56x45mm NATO
  • Barrel length: 16 inches
  • Action: Semi/Full
  • Weight: 14 units
  • Feeding: AUG magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), Glock Feldmesser 78 bayonet
    • Optics: NATO rail [NATO]
    • Underbarrel interface: Foregrip (Integrated)

AUG HBAR Enhanced

The same upgrade package as that for the AUG A1, but applied to the AUG HBAR. Although this package does not include a shorter barrel, it is still threaded.

  • Name: AUG HBAR Enhanced
  • Class: Class 1
  • Category: Machine gun
  • Caliber: 5.56x45mm NATO
  • Barrel length: 24.45 inches
  • Action: Semi/Full
  • Weight: 22 units
  • Feeding: AUG magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), Glock Feldmesser 78 bayonet
    • Optics: NATO rail [NATO]
    • Underbarrel interface: Bipod (Integrated)

UMP Enhanced

Installs a package of accessory rails on the UMP model of the customer's choice. The actual modifications done to each firearm are the same ; the only difference is the caliber of the host firearm.

  • Name: UMP9 Enhanced / UMP40 Enhanced / UMP45 Enhanced
  • Class: Class 2
  • Category: Submachine gun
  • Caliber: 9x19mm Parabellum / .40 S&W / .45 ACP
  • Barrel length: 8 inches (all versions)
  • Action: Semi/Full
  • Weight: 9 units
  • Feeding: UMP9 / UMP40 / UMP45 magazines, +1
  • Stock type: FS (Folding)
  • Accessory compatibility:
    • Muzzle: Threading(3-lug)
    • Optics: NATO rail, short [NATO-S]
    • Light mounts: 2, small
    • Underbarrel interface: Short

M2 Super 90 Enhanced

Installs a package of accessory rails on the Benelli M2 Super 90 3-Gun (or its 12 gauge CAWS conversion, the M2 Super 90 CS), as well as a threaded barrel.

  • Name: M2 Super 90 Enhanced / M2 Super 90 CS Enhanced
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 21 inches
  • Action: Semi
  • Weight: 18 units
  • Feeding: Internal tube, 8 + 1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO rail, short [NATO-S]
    • Light mounts: 2, small

M82A1M CQ

Replaces the M82's 29 inch barrel with a 20 inch one, thus making it a slightly lighter and more maneuverable weapon.

Resulting weapon:

  • Name: M82A1M CQ
  • Class: Class 1
  • Category: Precision rifle
  • Caliber: .50 BMG
  • Barrel length: 20 inches
  • Action: Semi
  • Weight: 30 units
  • Feeding: M82 magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility: Unchanged; remains the same as the original Barrett M82A1M

Mauser M03 Target Custom

Replaces the Mauser M03's wooden stock with an ultra lightweight synthetic stock, fitted with a full length NATO optic rail, a short underbarrel interface, and the barrel is threaded.

  • Weapon required: Mauser M03
  • Conversion cost: 250 P$

Resulting weapon:

  • Name: Mauser M03 Target Custom
  • Class: Class 1
  • Category: Conventional rifle
  • Caliber: 7.92x57mm Mauser
  • Barrel length: 20 inches
  • Action: Bolt-action
  • Weight: 18 units
  • Feeding: Internal magazine, 5 rounds, no +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO rail [NATO]
    • Underbarrel interface: Short

M590A1 Tactical Custom

The Mossberg 590A1 (or its CS variant) is fitted with a new, railed pump forend for compatibility with lights and lasers, the receiver is fitted with a short NATO optic rail, the barrel is threaded, and the fixed stock is also replaced with a tactical, M4-style 6-position stock in order to make it shorter and more manuverable.

  • Weapon required: Mossberg 590A1 or M590A1 CS
  • Conversion cost: 300 P$

Resulting weapon:

  • Name: M590A1 Tactical Custom / M590A1 CSTaC
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge / 12 gauge CAWS
  • Barrel length: 18.5 inches
  • Action: Pump-action
  • Weight: 14 units
  • Feeding: Internal tube, 8 rounds, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), M9 Bayonet
    • Light: 2, small
    • Optics: NATO rail, short [NATO-S]

AA-12 Enhanced

The AA-12's iron sights are removed and the charging handle is replaced with a side-protruding model. To replace the iron sights, the weapon is fitted with a long NATO optic rail capable of accomodating for optics of all lengths. In addition, the barrel is threaded, and the handguard is adorned with a triple rail system of generous length, further increasing accessory compatibility with a variety of lights and lasers, a foregrip, a bipod, and for the most audacious of all, an underbarrel grenade launcher. Because nothing says "overkill" better than a full-auto shotgun fitted with an UGL.

  • Weapon required: MPS AA-12
  • Conversion cost: 600 P$

Resulting weapon:

  • Name: AA-12 Enhanced
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 18 inches
  • Action: Full-auto
  • Weight: 22 units
  • Feeding: AA-12 magazines, no +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Optics: NATO rail [NATO]
    • Muzzle: Threading(Standard)
    • Light mounts: 2, large
    • Underbarrel interface: Long

FAMAS G2

The FAMAS G1 is upgraded to its G2 variant, where the standard FAMAS magazine well is replaced with a STANAG magazine-compatible magwell, allowing it to use STANAG magazines. In addition, the rifle is outfitted with the well-known FAMAS integrated bipod, affectionately nicknamed "surrender sticks". The rifle is otherwise unchanged, making it a cheap and very useful upgrade.

Resulting weapon:

  • Name: FAMAS G2
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 5.56x45mm NATO
  • Barrel length: 19.2 inches
  • Action: Semi/Burst3/Full
  • Weight: 14 units
  • Feeding: STANAG magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard), DLT FAMAS bayonet
    • Underbarrel interface: Bipod (Integrated)

L115A3 LRR

The L115A3 LRR is an upgrade of the AI AWSM rifle, fitting the rifle with a bipod for maximum accuracy. The rifle is otherwise unchanged, but this simple upgrade serves to maximize the AWSM's accuracy and usefulness for precision shooting.

Resulting weapon:

  • Name: L115A3 LRR
  • Class: Class 1
  • Category: Precision rifle
  • Caliber: .338 Lapua Magnum
  • Barrel length: 27 inches
  • Action: Bolt-action
  • Weight: 30 units
  • Feeding: AWSM magazines, +1
  • Stock type: FS (Folding)
  • Accessory compatibility:
    • Optics: NATO rail [NATO]
    • Muzzle: M.Brake (Integrated, R - threading is Standard)
    • Underbarrel interface: Bipod (Integrated)

CAWS Modernized

The CAWS Modernized is an effort to, as the name implies, enhance and modernize the CAWS shotgun by giving it the ability to mount modern accessories. The weapon is fitted with a variety of rails ; a NATO-S optic rail in replacement of the iron sights, two large Light mounts, and a long underbarrel interface which includes UGL compatibility. In addition, the barrel is threaded, to allow for the mounting of muzzle devices, further increasing the capabilities of an already powerful weapon.

  • Weapon required: H&K CAWS
  • Conversion cost: 600 P$

Resulting weapon:

  • Name: CAWS Modernized
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge CAWS
  • Barrel length: 18 inches
  • Action: Semi/Full
  • Weight: 14 units
  • Feeding: CAWS magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Optics: NATO Short rail [NATO-S]
    • Muzzle: Threading(Standard)
    • Light mounts: 2, large
    • Underbarrel interface: Long

G11K2 Modernized

The G11K2 Modernized is an effort to, as the name implies, enhance and modernize the G11 rifle by giving it the ability to mount modern accessories. The weapon is fitted with a variety of rails ; a NATO-S optic rail in replacement of the integrated reflex sight, two large Light mounts, a long underbarrel interface which includes UGL compatibility. In addition, the barrel is threaded, to allow for the mounting of muzzle devices, all of which further transform the prototype rifle into a viable combat weapon.

  • Weapon required: H&K G11K2
  • Conversion cost: 600 P$

Resulting weapon:

  • Name: G11K2 Modernized
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 4.73x33mm Caseless
  • Barrel length: 21.26 inches
  • Action: Semi/Full
  • Weight: 14 units
  • Feeding: G11 magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO Short rail [NATO-S]
    • Light mounts: 2, large
    • Underbarrel interface: Long

LMG11 Modernized

The same package of modifications that is offered to the G11K2 is also available to the custom LMG11 machine gun.

  • Weapon required: H&K LMG11
  • Conversion cost: 600 P$

Resulting weapon:

  • Name: LMG11 Modernized
  • Class: Class 1
  • Category: Machine gun
  • Caliber: 4.73x33mm Caseless
  • Barrel length: 27 inches
  • Action: Semi/Full
  • Weight: 18 units
  • Feeding: LMG11 ammo cassette, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Optics: NATO Short rail [NATO-S]
    • Light mounts: 2, large
    • Underbarrel interface: Long

H&H Royal Scoped

Do you own an overpriced, grossly overpowered, dragon-hunting .577 Nitro Express double rifle? We can get it fitted with a 4x optic, so that you can look at the dragon in the eyes before you turn it to paste.

Resulting weapon:

  • Name: H&H Royal Scoped
  • Class: Class 1
  • Category: Conventional rifle
  • Caliber: .577 Nitro Express
  • Barrel length: 23 inches
  • Weight: 26
  • Capacity: 2 (Double barrel)
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Optics: Scope [4x] (Integrated)

M3 Super 90 Enhanced

Installs a package of accessory rails on the Benelli M3 Super 90 Convertible (or its 12 gauge CAWS conversion, the M3 Super 90 CS), as well as a threaded barrel.

  • Name: M3 Super 90 Enhanced / M3 Super 90 CS Enhanced
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 18.5 inches
  • Action: Pump/Semi
  • Weight: 18 units
  • Feeding: Internal tube, 7 + 1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO rail, short [NATO-S]
    • Light mounts: 2, small

MAB-38/49 Short Carbine

Replaces the barrel on the Beretta MAB-38 submachine gun, ditching the 12.4" barrel in favor of a shorter 8.27" barrel. Although installing such a barrel will reduce the amount of damage the submachine gun can output, it becomes short enough to fit as a Class 2 weapon, a considerable tactical advantage as it frees up space for Class 1 weapons, as well as making it lighter overall.

  • Name: MAB-38/49 Short Carbine
  • Class: Class 2
  • Category: Submachine gun
  • Caliber: 9x19mm Parabellum
  • Barrel length: 8.27 inches
  • Action: Semi/Full
  • AutoROF: 5
  • Weight: 14 units
  • Feeding: MAB-38 magazines, no +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: M.Brake (Integrated)

OMEN Recon

Replaces the standard 24 inch barrel and handguard on the NEMO Arms OMEN Watchman rifle, in favor of a shorter, 18 inch barrel. It is otherwise exactly the same as the stock Watchman, only in a shorter package.

  • Name: OMEN Recon
  • Class: Class 1
  • Category: Conventional rifle
  • Caliber: .300 Winchester Magnum
  • Barrel length: 18 inches
  • Action: Semi-auto
  • Weight: 22 units
  • Feeding: OMEN Watchman magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility: Unchanged; remains the same as the OMEN Watchman.

MTs-255 Tactical

The wood furniture is replaced with lightweight black plastic, and the new stock includes a pistol grip. The barrel is replaced with a shorter one (23.62") and is threaded. Lastly, the top of the frame is fitted with a short NATO optic rail, which may be used to mount optics.

  • Name: MTs-255 Tactical
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 23.62 inches
  • Action: Semi
  • Weight: 18 units
  • Feeding: Cylinder, 5 rounds
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading (Standard)
    • Optics: NATO rail, short [NATO-S]

OTs-63 Tactical Revolver Shotgun

The top of the frame is fitted with a short NATO optic rail, allowing this humongous excuse for a "handgun" to be mounted with an optic - because the one thing your stockless, short-barreled pocket scattergun needs is a scope.

  • Name: OTs-63 Tactical Revolver Shotgun
  • Class: Class 3
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 7.87 inches
  • Action: Semi
  • Weight: 5 units
  • Feeding: Cylinder, 5 rounds
  • Stock type: N (No stock)
  • Accessory compatibility:
    • Optics: NATO rail, short [NATO-S]

Desert Eagle Rifle Package

Replaces the barrel of the Desert Eagle with a rifle-length 14" barrel, as well as installing a black plastic thumbhole grip fitted with an adapter, itself mated to a retractable stock, transforming the hand-cannon pistol into the DERP, in the caliber of your choice. In addition, the barrel is threaded, for further modularity.

  • Name: Desert Eagle Rifle Package 357 / Desert Eagle Rifle Package 44 / Desert Eagle Rifle Package 50
  • Class: Class 3
  • Category: Pistol
  • Caliber: .357 Magnum / .44 Magnum / .50 Action Express
  • Barrel length: 14 inches
  • Action: Semi
  • Weight: 14 units
  • Feeding: Desert Eagle .357 / .44 / .50 magazines, +1
  • Stock type: RS (Retractable)
  • Accessory compatibility:
    • Muzzle: Threading (Standard)
    • Optics: NATO rail, short [NATO-S]

KH2002 Katiba

The KH2002 Sama's carrying handle is fitted with a full-length NATO rail, in order to make the rifle compatible with a range of optics. The rifle is otherwise unchanged, but this simple upgrade serves to enhance the usefulness of this weapon.

  • Name: KH2002 Katiba
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 5.56x45mm NATO
  • Barrel length: 20 inches
  • Action: Semi/Burst3/Full
  • Weight: 14 units
  • Feeding: STANAG magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility: Same as the original weapon plus the following:
    • Optics: NATO rail, long [NATO]

AUG Para A3 XS Enhanced

The AUG submachine gun receives a modernization makeover! The integrated optic and foregrip are removed. In their stead, the submachine gun now has a short NATO optic rail, a short underbarrel rail for attaching bipods and foregrips at the user's choosing. In addition, the receiver receives one extra large light rail, and for good measure, the barrel is threaded. An already awesome submachine gun turned into a serious weapon, allowing the user to make full use of the 16.5" barrel and the weapon's capabilities!

  • Name: AUG Para A3 XS Enhanced
  • Class: Class 2
  • Category: Submachine gun
  • Caliber: 9x19mm Parabellum
  • Barrel length: 16.5 inches
  • Action: Semi/Full
  • Weight: 14 units
  • Feeding: Steyr MPi magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO rail, short [NATO-S]
    • Underbarrel interface: Short rail
    • Light mounts: 1, Long

FNAR Tactical

The FN FNAR Match's original 20" barrel is replaced by a shorter, 16" barrel, which is also threaded. In addition, the rifle's handguard is replaced by a tactical one, with three rails: two on the sides for light mounts, and one on the underside for mounting a foregrip or a bipod. The resulting rifle is lighter and much more adaptable than its original iteration.

  • Name: FNAR Tactical
  • Class: Class 1
  • Category: Precision rifle
  • Caliber: 7.62x51mm NATO
  • Barrel length: 16 inches
  • Action: Semi
  • Weight: 22 units
  • Feeding: FN FNAR magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO rail, long [NATO]
    • Underbarrel interface: Short rail
    • Light mounts: 2, Long

Groza-1/2/3 GL

The OTs-14 Groza-1 rifle (or any of its Minor Rechambered variants, the Groza-2 and Groza-3) receives a simple modification to its receiver: the foregrip is deleted, and replaced by an integrated GP-30 underbarrel grenade launcher, improving the weapon's lethality at the cost of making the weapon a little heavier than normal.

  • Name: Groza-1 GL / Groza-2 GL / Groza-3 GL
  • Class: Class 2
  • Category: Combat rifle
  • Caliber: 7.62x39mm / 5.45x39mm / 5.56x45mm NATO
  • Barrel length: 16.3 inches
  • Action: Semi/Full
  • Weight: 18 units
  • Feeding: AK-47 magazines / AK-74 magazines / AK-101 magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Underbarrel interface: GP-30 UGL (Integrated)

Groza-4 GL

The OTs-14 Groza-4 rifle receives a simple modification to its receiver: the foregrip is deleted, and replaced by an integrated GP-30 underbarrel grenade launcher, improving the weapon's lethality at the cost of making the weapon a little heavier than normal.

  • Name: Groza-4 GL
  • Class: Class 2
  • Category: Combat rifle
  • Caliber: 9x39mm
  • Barrel length: 9.4 inches
  • Action: Semi/Full
  • Weight: 14 units
  • Feeding: AS Val magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Underbarrel interface: GP-30 UGL (Integrated)

Groza-4 SSR

This modification of the OTs-14 Groza-4 is designated SSR for Silent Sniper Rifle. Indeed, the Groza-4 is modified so that the foregrip is deleted entirely, in order to make way for an integrally suppressed barrel. The carrying handle is fitted with a 4x fixed power optic, transforming the Groza-4 into an unique, bullpup, silenced sniper rifle!

  • Name: Groza-4 SSR
  • Class: Class 2
  • Category: Combat rifle
  • Caliber: 9x39mm
  • Barrel length: 9.4 inches
  • Action: Semi/Full
  • Weight: 9 units
  • Feeding: AS Val magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Silencer (Integrated)
    • Optics: Scope[4x] (Integrated)

Auto-5 RA

The Browning Auto-5's original 4-round internal magazine is removed, and replaced with a special, Rhodesian-style, 8-round tube. The 28" field barrel is replaced with a 23" riot barrel, the length of which almost matches the magazine tube in length. Comes with a special elongated wood handguard and a short NATO optics rail. The Auto-5 never dies!

  • Name: Auto-5 RA
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 23 inches
  • Action: Semi
  • Weight: 22 units
  • Feeding: Internal tube, 8 + 1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Optics: NATO rail, short [NATO-S]

EF88 Austeyr FS

FS stands for Full Size. The original, carbine-length EF88 Austeyr is fitted with a longer, 20 inch barrel, as well as a bayonet lug. Although it remains a Weight 14 weapon, the FS modification makes it become a Class 1 weapon, similar to a number of other combat rifles.

  • Name: EF88 Austeyr FS
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 5.56x45mm NATO
  • Barrel length: 20 inches
  • Action: Semi/Full
  • AutoROF: 5
  • Weight: 14 units
  • Feeding: AUG magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading (Standard), M9 Bayonet
    • Optics: NATO rail [NATO]
    • Light mounts: 2, Long
    • Underbarrel interface: Short

EF88 Austeyr GL

Similar to the FS modification above, but instead of leaving a Short underbarrel interface, the Austeyr is fitted with an integrated Steyr SL40 40mm grenade launcher.

  • Name: EF88 Austeyr GL
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 5.56x45mm NATO
  • Barrel length: 20 inches
  • Action: Semi/Full
  • AutoROF: 5
  • Weight: 18 units
  • Feeding: AUG magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading (Standard), M9 Bayonet
    • Optics: NATO rail [NATO]
    • Light mounts: 2, Long
    • Underbarrel interface: UGL (Integrated) ; Steyr SL40 integrated grenade launcher

Tavor 7 Enhanced

Installs a package of accessory rails on the IWI Tavor 7, as well as a threaded barrel.

  • Name: Tavor 7 Enhanced
  • Class: Class 2
  • Category: Combat rifle
  • Caliber: 7.62x51mm NATO
  • Barrel length: 17 inches
  • Action: Semi/Full
  • AutoROF: 6
  • Weight: 18 units
  • Feeding: AR-10 magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO rail, short [NATO-S]
    • Light mounts: 2, long
    • Underbarrel interface: Short

PSDR-3

The PSDR-3 is a heavily modified S&W Model 625-2, a .45 ACP revolver. The revolver is encased in a large suppressor device, which is designed to trap all escaping gases, from the cylinder gap to the muzzle. In addition, the weapon has been fitted with a folding stock, an integrated weaponlight, and an integrated red dot sight, transforming an unremarkable revolver into one of the most unique firearms ever designed, suitable for covert operations and other situations requiring stealth! Although the extent of all of these modifications greatly increased the size and bulk of this weapon, the sheer novelty factor of the PSDR-3 should be enough to seduce any amateur of unique and unusual weapons.

Resulting weapon:

  • Name: PSDR-3
  • Class: Class 2
  • Category: Variable
    • With stock folded, the weapon is a Revolver, and calls for the relevant combat skills.
    • With stock open, the weapon is a Conventional rifle, and calls for the relevant combat skills.
  • Caliber: .45 ACP
  • Barrel length: 5 inches
  • Action: DA/SA
  • Weight: 9 units
  • Feeding: Cylinder, 6 rounds, no +1
  • Stock type: FS (Folding)
  • Accessory compatibility:
    • Muzzle: Silencer (Integrated)
    • Optics: Red dot sight (Integrated)
    • Light mounts: Weaponlight (Integrated, 200 turns, soft light)

Sturmgewehr 44 Enhanced

The receiver of the Sturmgewehr 44 is drilled and tapped with a G43 side mount, similar to certain prototype variants of the past, when the rifle was being tested for sniping purposes. This G43 mount can be fitted with the KZF ZF4 optic, just like on the Gewehr 43.

  • Name: Sturmgewehr 44 Enhanced
  • Class: Class 1
  • Category: Combat rifle
  • Caliber: 7.92x33mm Kurz
  • Barrel length: 16.5 inches
  • Action: Semi/Full
  • AutoROF: 5
  • Weight: 22 units
  • Feeding: StG-44 magazines, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Optics: G43 mount

M500 T-TR

The Mossberg 500 Tactical receives three additional rails, to allow for mounting optics, lights, and lasers; hence the name: T-TR, for Tactical-Triple Rail.

Resulting weapon:

  • Name: M500 T-TR
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 20 gauge
  • Barrel length: 20 inches
  • Action: Pump-action
  • Weight: 14 units
  • Feeding: Internal tube, 7 rounds, +1
  • Stock type: S (Fixed)
  • Accessory compatibility:
    • Optics: NATO Short rail [NATO-S]
    • Light mounts: 2, short

TOZ-106 Tactical

This weird, strange little box-fed, bolt-action shotgun is made even weirder with the addition of three rails; one for optics and two for lights and lasers.

Resulting weapon:

  • Name: TOZ-106 Tactical
  • Class: Class 2
  • Category: Shotgun
  • Caliber: 20 gauge
  • Barrel length: 11.6 inches
  • Action: Bolt-action
  • Weight: 9 units
  • Feeding: TOZ-106 magazines, +1
  • Stock type: FS (Folding)
  • Accessory compatibility:
    • Optics: NATO Short rail [NATO-S]
    • Light mounts: 2, short

Four Barrel Sawed-Off

Two barrels isn't enough? How about three? No? You want a four barrel shotgun, one that's short enough so you can stick it into a leg holster, and pretend you're some sort of road warrior but with double the shotgun? You're insane. We have exactly what you need.

Resulting weapon:

  • Name: Four Barrel Sawed-Off
  • Class: Class 3
  • Category: Shotgun
  • Caliber: 20 gauge
  • Barrel length: 10 inches
  • Action: Single shot (x4)
  • Weight: 9 units
  • Capacity: 4 (quadruple barrel)
  • Stock type: N (No stock)
  • Accessory compatibility: Unchanged

Pecheneg Zenit

The Pecheneg Zenit is nothing more than a bullpup conversion of the PKP Pecheneg machine gun. Reducing the overall length of the weapon by about 11 inches, the Zenit also provides the user with an integrated foregrip, a short NATO optics rail, and a comfortable cheek rest. Ammo belt boxes are mounted to the weapon at a 135 degree angle in front of the trigger, but the ammo belts do indeed need to be fed into the rear of the weapon, making this a true bullpup. Hope your shoulders are tough.

Resulting weapon:

  • Name: Pecheneg Zenit
  • Class: Class 1
  • Category: Machine gun
  • Caliber: 7.62x54mm R
  • Barrel length: 25.9 inches
  • Action: Full-auto
  • AutoROF: 5
  • Weight: 26 units
  • Feeding: PK ammo belt boxes, no +1
  • Stock type: S (Stock)
  • Accessory compatibility:
    • Optics: NATO Short rail [NATO-S]
    • Underbarrel interface: Bipod (Integrated), Foregrip (Integrated)

XM2XI "X-Shotgun" Mark 2

It's an X-Shotgun, but with a top rail and side rails. 'Nuff said.

  • Weapon required: XM2XI "X-Shotgun"
  • Conversion cost: 500 P$
  • Name: XM2XI "X-Shotgun" Mark 2
  • Class: Class 1
  • Category: Shotgun
  • Caliber: 12 gauge
  • Barrel length: 21 inches
  • Action: Semi
  • Weight: 22 units
  • Feeding: Internal tube, 25 rounds, +1
  • Stock type: S (Fixed)
  • Firearm maintenance stats: DV+4 RV+3
  • Accessory compatibility:
    • Muzzle: Threading(Standard)
    • Optics: NATO Short rail [NATO-S]
    • Light mounts: 2, Long

See also