Customs:Weapons (no ontology)

From Mazeworld

(Difference between revisions)
(→Receiver configurations (AK))
(→Barrel materials)
Line 635: Line 635:
'''4150 Carbon Steel barrel'''
'''4150 Carbon Steel barrel'''
-
* Equipped firearm obtains the following bonuses: '''Maximum Durability value x1.25''', '''Maximum Reliability value x1.1'''.
+
* Equipped firearm obtains the following bonuses: '''Maximum Condition value x1.25''', '''Maximum Cleanliness value x1.1'''.
* Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 1 pressure level lower.
* Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 1 pressure level lower.
'''4150CS barrel + Titanium Nitride (TiN) coating'''
'''4150CS barrel + Titanium Nitride (TiN) coating'''
-
* Equipped firearm obtains the following bonuses: '''Maximum Durability value x2''', '''Maximum Reliability value x1.25'''.
+
* Equipped firearm obtains the following bonuses: '''Maximum Condition value x2''', '''Maximum Cleanliness value x1.25'''.
* Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 2 pressure levels lower.
* Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 2 pressure levels lower.
'''4150CS barrel + NP3 coating'''
'''4150CS barrel + NP3 coating'''
-
* Equipped firearm obtains the following bonuses: '''Maximum Durability value x1.25''', '''Maximum Reliability value x1.5''', '''Cleaning effectiveness x2'''.
+
* Equipped firearm obtains the following bonuses: '''Maximum Condition value x1.25''', '''Maximum Cleanliness value x1.5''', '''Cleaning effectiveness x2'''.
** Improved cleaning effectiveness: When using a Gun Cleaning Kit on a firearm with NP3 coating, the GCK restores up to 2000 cleanliness points instead of 1000.
** Improved cleaning effectiveness: When using a Gun Cleaning Kit on a firearm with NP3 coating, the GCK restores up to 2000 cleanliness points instead of 1000.
* Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 1 pressure level lower.
* Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 1 pressure level lower.

Revision as of 22:23, 11 December 2014

Weapon customization services rely on the principle of weapon families - specific firearms belonging to the same family (typically they share the same base design) are eligible for extensive customization, due to innate design and/or popularity of the platform. There are 11 firearm families which can receive various types of modifications.
Firearms may also be customized visually - they simply serve to give a more unique description to the firearm, with the use of paint jobs and color schemes. Visual modifications can be done on any weapon, even if it doesn't belong to one of the Customs families, and bear no influence on the actual performance of the weapon.

Each Customs family will be detailed, along with the customization options available in each.

  • NOTE: For all families, the Contestant and his/her eventual allies cannot purchase more than 3 custom magazines per type and per visit; furthermore, non-custom magazines (i.e. which is used by one or more stock firearms) are not sold here.

1911 Single Stack (1911SS)

This semi-automatic pistol platform is based on the well-known 1911 design, which in the Mazes is most well known in its .45 ACP iteration, the Colt M1911A1. 1911SS pistols use a slim profile and single-stack magazines. Though this platform is not putting emphasis on specific tactical doodads, they are praised for their high durability and reliability, ease of use, and ease of maintenance, and are primarily destined for people looking for the most dependable handgun family they can find.

Stock 1911SS firearms

Customization options (1911SS)

All stock 1911SS pistols are Class 3, Weight 3.

Rechambering (1911SS)

Legacy calibers

Nonstandard calibers

Note: All "Custom" magazines for 1911SS pistols weigh 0.5 units empty.
/!\: 1911SS pistols chambered in .40 S&W can re-use the 1911 Fastback Nightmare's magazines, as .40 S&W and .357 SIG have the same base diameter, however be careful to note that .40 S&W pistols cannot shoot .357 SIG and vice versa. A warning will be given if your Contestant is trying to load the wrong type of ammunition in his/her firearm.

Barrel (1911SS)

Barrel porting

  • Drills holes in the barrel and the slide of the weapon, which acts as an integrated muzzle brake of sorts. Provides the weapon with a natural Recoil -1 bonus. Does not preclude installing a proper muzzle brake for extra recoil reduction.
    • WARNING: If your barrel is ported, the use of a silencer is possible but rendered useless - stealth shots are impossible with a ported barrel (the firearm is too loud).

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Other modifications (1911SS)

Scope rail mounts

  • Allows the mounting of either a Small scope (2x) or an EOTech MRDS reflex sight.

Visual modifications: See here for a list of preset color schemes.

1911 Double Stack (1911DS)

Operating on the same principle as the 1911SS platform, 1911DS are also semi-automatic pistols based on the 1911 design, but this variant had to be differentiated due to their larger profile, allowing the use of larger magazines. Durable and reliable, though not as much as their 1911SS equivalents, the double stack platform more than makes up with nearly double standard magazine capacity.

Stock 1911DS firearms

Customization options (1911DS)

All stock 1911DS pistols are Class 3, Weight 3.

Rechambering (1911DS)

Legacy calibers

Nonstandard calibers

Note: All "Custom" magazines for 1911DS pistols weigh 0.5 units empty.
/!\: 1911DS pistols chambered in .357 SIG can re-use the P-16's magazines, as .40 S&W and .357 SIG have the same base diameter, however be careful to note that .40 S&W pistols cannot shoot .357 SIG and vice versa. A warning will be given if your Contestant is trying to load the wrong type of ammunition in his/her firearm.

Barrel (1911DS)

Barrel porting

  • Drills holes in the barrel and the slide of the weapon, which acts as an integrated muzzle brake of sorts. Provides the weapon with a natural Recoil -1 bonus. Does not preclude installing a proper muzzle brake for extra recoil reduction.
    • WARNING: If your barrel is ported, the use of a silencer is possible but rendered useless - stealth shots are impossible with a ported barrel (the firearm is too loud).

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Other modifications (1911DS)

Scope rail mounts

  • Allows the mounting of either a Small scope (2x) or an EOTech MRDS reflex sight.

Visual modifications: See here for a list of preset color schemes.

Blackhawk

The Blackhawk family is a single-action revolver platform based on the Ruger Blackhawk and its variants. Although single-action firearms are slower to use than double-action revolvers or pistols of any kind, they compensate with a wide offering of calibers, and unmatched durability and reliability, as is typical with heavy single-action revolvers. Built to withstand powerful loads such as .44 Magnum or .454 Casull, there is almost no pistol caliber, bar rare exceptions, that the Blackhawk can't handle.

Stock Blackhawk firearms

Customization options (Blackhawk)

All stock Blackhawk revolvers are Class 3, Weight 5.

Rechambering (Blackhawk)

Legacy calibers/cylinder configurations

Nonstandard calibers/cylinder configurations

Every combination possible of non-standard caliber and cylinder size has a corresponding speed strip with the relevant capacity.
The nomenclature is: "Custom <caliber> <capacity>-round speed strip".
Example: A Blackhawk customized with a 7-round 10mm Auto cylinder can be supplied with speed strips named: "Custom 10mm Auto 7-round speed strip".
All speed strips weigh 0.25 empty.

Barrel (Blackhawk)

Barrel length configurations

  • Vaquero configuration: 4.62 inch barrel. Changes the weapon weight to 3 units.
  • Blackhawk configuration: 7.5 inch barrel. Changes the weapon weight to 5 units.
    • Standard on Ruger Blackhawk.
  • Super Blackhawk configuration: 7.5 inch barrel, railed. Changes the weapon weight to 5 units, and makes it compatible with the Small scope (2x).
    • Standard on the Ruger Super Blackhawk.

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Other modifications (Blackhawk)

Visual modifications: See here for a list of preset color schemes.

L-Frame

Based on the family of Smith & Wesson revolvers of the same name, L-Frame revolvers offer a wide variety of calibers and customization options with the advantages of a sturdy double-action revolver. Though this platform may not match the extreme resistance to use and abuse the Blackhawk platform can handle, L-Frames remain firearms of exceptional quality. It must be noted that the only caliber the L-Frame will not handle compared to Blackhawks, is .454 Casull. .45 Colt remains compatible, though.

Stock L-Frame firearms

Customization options (L-Frame)

All stock L-Frame revolvers are Class 3, with variable weights:

  • Model 686: Weight 5 (6 inch barrel)
  • Model 620: Weight 3 (4 inch barrel)

Rechambering (L-Frame)

Legacy calibers/cylinder configurations

Nonstandard calibers/cylinder configurations

Every combination possible of non-standard caliber and cylinder size has a corresponding speedloader or moonclip.
The nomenclature is: "Custom L-Frame <capacity>-round <caliber> <speedloader/moonclip>".
Example: An L-Frame customized with a 5-round .44 Magnum cylinder can be supplied with speedloaers named: "Custom .44 Magnum 5-round speedloaders".
NOTE: Certain calibers are preceded with a *: this denotes the cartridge is rimless and moonclips will be supplied instead of speedloaders. The only practical difference between a speedloader and a moonclip is that a moonclip is inserted into the gun (like a magazine on semi-autos), while a speedloader empties the rounds it holds then returns to the inventory. Keep this in mind for inventory management.
All speedloaders and moonclips weigh 0.25 empty.

Barrel (L-Frame)

Barrel length configurations

  • 6 inch barrel configuration: As it says. Changes the weapon weight to 5 units.
  • 4 inch barrel configuration: As it says. Changes the weapon weight to 3 units.
  • Snub-nose configuration: 2 inch barrel. Changes the weapon weight to 2 units.
  • Long barrel configuration: 10 inch barrel, railed. Changes the weapon weight to 5 units.

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Other modifications (L-Frame)

Scope rail mounts: Available under certain conditions

  • Allows the mounting of a Small scope (2x).
  • Only available to weapons using the Long barrel configuration.

Visual modifications: See here for a list of preset color schemes.

Glock-SF

The Glock family of semi-automatic handguns is represented in the Maze Customs in two distinct families: Glock Short Frame (Glock-SF) and Glock Large Frame (Glock-LF). At the exception of the straight blowback Glock 25, all of the Glocks in the Mazes are found in those two families. Reputed for being lightweight, sturdy pistols with exceptional resistance to abuse, the capacity to function even in the direst of environments, they are part of the Customs family as the semi-automatic pistol platform which may receive an extreme variety of modifications, up and including to the highly popular, Glock 18-derived auto sear, which allows the weapon to function as a machine pistol.

The Glock Short Frame family is named as such because it designates Glock pistols built on the frame and slide size specifications of the original Glock 17, chambered in 9x19mm.

Stock Glock-SF firearms

Customization options (Glock-SF)

All stock Glock pistols are Class 3, Weight 3.

Rechambering (Glock-SF)

Legacy calibers

  • .357 SIG (Glock .40/.357 15-round magazines /!\) (Custom Glock .40/.357 magazines, capacity 30 rounds)
  • .40 S＆W (Glock .40/.357 15-round magazines /!\) (Custom Glock .40/.357 magazines, capacity 30 rounds)
  • 9x19mm Parabellum (Glock 9mm magazines)

Nonstandard calibers

Note: All "Custom" magazines for Glock-SF pistols weigh 0.5 units empty.

/!\: Glock-SF pistols chambered in .357 SIG or .40 S&W use the same magazines, as .40 S&W and .357 SIG have the same base diameter, however be careful to note that .40 S&W pistols cannot shoot .357 SIG and vice versa. A warning will be given if your Contestant is trying to load the wrong type of ammunition in his/her firearm.

Barrel (Glock-SF)

Barrel porting

  • Drills holes in the barrel and the slide of the weapon, which acts as an integrated muzzle brake of sorts. Provides the weapon with a natural Recoil -1 bonus. Does not preclude installing a proper muzzle brake for extra recoil reduction.
    • Note: The Glock 18C comes standard with a ported barrel.
    • WARNING: If your barrel is ported, the use of a silencer is possible but rendered useless - stealth shots are impossible with a ported barrel (the firearm is too loud).

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Fire selectors (Glock-SF)

Semi/Full selector switch

  • This service installs a selector switch on the slide, allowing the user to choose between semi-automatic and fully-automatic fire.
    • Note: The Glock 18C comes standard with this switch.

Other modifications (Glock-SF)

Scope rail mounts

  • Allows the mounting of either a Small scope (2x) or an EOTech MRDS reflex sight.

Visual modifications: See here for a list of preset color schemes.

Category changes notes (Glock-SF)

  • If the weapon is equipped with a Semi/Full selector switch, it is considered to be an Auto pistol.
  • All other configurations: Pistol.

Glock-LF

The Glock family of semi-automatic handguns is represented in the Maze Customs in two distinct families: Glock Short Frame (Glock-SF) and Glock Large Frame (Glock-LF). At the exception of the straight blowback Glock 25, all of the Glocks in the Mazes are found in those two families. Reputed for being lightweight, sturdy pistols with exceptional resistance to abuse, the capacity to function even in the direst of environments, they are part of the Customs family as the semi-automatic pistol platform which may receive an extreme variety of modifications, up and including to the highly popular, Glock 18-derived auto sear, which allows the weapon to function as a machine pistol.

The Glock Large Frame family is named as such because it designates Glock pistols built on the frame and slide size specifications of the Glock 20, specially designed to accomodate for the long 10mm Auto cartridge. From it was derived the Glock 21, its .45 ACP variant, because the .45 ACP cartridge was unsuitable for use in the Small Frame platform. As such, the Glock-LF is tailored for long handgun cartridges, and large calibers; with real-life rechambering options existing in calibers up to .50.

Stock Glock-LF firearms

Customization options (Glock-LF)

All stock Glock pistols are Class 3, Weight 3.

Rechambering (Glock-LF)

Legacy calibers

  • .45 ACP (Glock 21 13-round magazines, KRISS Vector 30-round magazines)
  • 10mm Auto (Glock 20 magazines) (Custom Glock 10mm magazines, capacity 30 rounds)

Nonstandard calibers

Note: All "Custom" magazines for Glock-LF pistols weigh 0.5 units empty.

Barrel (Glock-LF)

Barrel porting

  • Drills holes in the barrel and the slide of the weapon, which acts as an integrated muzzle brake of sorts. Provides the weapon with a natural Recoil -1 bonus. Does not preclude installing a proper muzzle brake for extra recoil reduction.
    • WARNING: If your barrel is ported, the use of a silencer is possible but rendered useless - stealth shots are impossible with a ported barrel (the firearm is too loud).

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Fire selectors (Glock-LF)

Semi/Full selector switch

  • This service installs a selector switch on the slide, allowing the user to choose between semi-automatic and fully-automatic fire.

Other modifications (Glock-LF)

Scope rail mounts

  • Allows the mounting of either a Small scope (2x) or an EOTech MRDS reflex sight.

Visual modifications: See here for a list of preset color schemes.

Category changes notes (Glock-LF)

  • If the weapon is equipped with a Semi/Full selector switch, it is considered to be an Auto pistol.
  • All other configurations: Pistol.

MP5

As the fan favorite submachine gun in the Mazes, loved and favored by many, the MP5 is available in the Customs as the full-size submachine gun platform, with all of the renowned advantages that made the MP5 famous. With unmatched durability and reliability, various customization options, and of course, the submachine gun's ever-popular compatibility with accessories, this Customs family is one of the most popular, and a fan favorite of many Class 2 weapon enthusiasts. Only the compact MP5K is not included in this family as it is not a full-size variant.

Stock MP5 firearms

Customization options (MP5)

All stock MP5 submachine guns are Class 2, Weight 9.

Rechambering (MP5)

Legacy calibers

Nonstandard calibers

Note: All "Custom" magazines for MP5s weigh 0.5 units empty.
/!\: MP5s chambered in .357 SIG can re-use the MP5/40's magazines, as .40 S&W and .357 SIG have the same base diameter, however be careful to note that .40 S&W caliber MP5s cannot shoot .357 SIG and vice versa. A warning will be given if your Contestant is trying to load the wrong type of ammunition in his/her firearm.

Barrel (MP5)

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

MP5 Sound Dampened (SD) conversion

  • Replaces the barrel and the handguard of an MP5 with the SD system, which installs a ported and integrally suppressed barrel.
  • NOTE: If installed, the RIS quad rails package cannot be installed.
    • Effect: The firearm is treated as having both a silencer and a muzzle brake, both integrated. In turn, muzzle accessories cannot be mounted on the weapon.

Fire selector configurations (MP5)

  • Semi-auto only
  • Semi/Full (Standard on MP5A3, MP5/40A2 and MP5/10A3)
  • Semi/Burst2/Full
  • Semi/Burst3/Full

Cosmetic stock variants (MP5)

None of the options modify weapon weight.

Full stocks:

  • A2 solid fixed stock

Retractable stocks

  • A3 retractable stock

Folding stocks

  • MP5-PDW folding stock
  • UMP folding stock

Other modifications (MP5)

Scope rail mounts

  • Adds a top picatinny rail for mounting optics. Compatible with EOTech 553, EOTech MRDS, Small scope, Backup scope and ACOG.

RIS quad rails package

  • Replaces the MP5's traditional handguard with a RIS quad-rail handguard. Adds compatibility to: Foregrip, M203PI, 2 light mounts (All small and large lights, Laserlyte SCV4 and AN/PEQ-5).

Visual modifications: See here for a list of preset color schemes.

Category changes notes (MP5)

  • If the weapon is equipped with a "Semi-auto only" fire selector, it is considered to be a Conventional rifle.
  • All other configurations: Submachine gun.

AR-15

No customs atelier would be worthy of bearing the name if it wasn't working on the ubiquitous and almost legendary AR-15 platform, often nicknamed the "Black Rifles", after their standard color. With its origins tied in the M16/M4 family of assault rifles, the AR-15's excellent modularity and almost endless combination of customization options more than make up for its average durability and reliability. The military's official stance on service weapons is clear: if there was only one they could take, it would be an AR-15 variant.

Stock AR-15 firearms

Customization options (AR-15)

Stock AR-15 rifles have various Classes and Weights.

Rechambering (AR-15)

Legacy calibers

Nonstandard calibers

  • 5.45x39mm (Tavor X95 magazines)
  • .30 Carbine (M1 Carbine magazines)
  • .40 S＆W (Custom AR .40 magazines, capacity 32 rounds, weight 0.5)
  • .45 ACP (Custom AR .45 magazines, capacity 32 rounds, weight 0.5)
  • 5.7x28mm (P90 magazines, AR-57 configuration)
  • 10mm Auto (Custom AR 10mm magazines, capacity 32 rounds, weight 0.5)
  • .22 Long Rifle (Custom AR .22 magazines, capacity 32 rounds, weight 1)

Barrel (AR-15)

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Upper receiver configurations (AR-15)

  • Old style - Features a non-detachable carry handle.
    • Four different cosmetic variants exist: the Slickslide (M16 standard), A1 upper (M16A1 standard), A2 upper (M16A2 and AR-15A2 standard) and SMG upper (9mm SMG standard)
    • Makes the weapon compatible with the Aimpoint CompM2 reflex sight.
  • Flat top - Features a detachable carry handle on an accessory rail.
    • Comes standard with the M16A4, M4A1 and Mk18 mod 0.
    • Makes the weapon compatible with the Trijicon ACOG TA01 scope (4x) and the EOTech 512 reflex sight.
  • Low-profile sniper - Features an integrated telescopic sight.
    • Makes the weapon incompatible with any optional optics, but equips the weapon with an integrated 9x power scope instead.

Fire selector configurations (AR-15)

  • Semi-auto only (Standard on AR-15A2)
  • Semi/Full (Standard on M16, M16A1, 9mm SMG, M4A1 and Mk18 mod 0)
  • Semi/Burst3 (Standard on M16A2 and M16A4)
  • Burst3/Full

Barrel length/Stock configurations (AR-15)

  • Rifle configuration: 20 inch barrel, fixed stock. Turns the weapon into a Class 1, Weight 18.
  • Carbine configuration: 14.5 inch barrel, retractable stock. Turns the weapon into a Class 1, Weight 14.
  • Subcarbine configuration: 10.5 inch barrel, retractable stock. Turns the weapon into a Class 2, Weight 9.
    • Three different cosmetic variants of the full stock exist: the Solid fixed stock (M16 standard), A1 fixed stock (M16A1 standard) and A2 fixed stock (M16A2, AR-15A2, M16A4 standard)
    • Two different cosmetic variants of the retractable stock exist: the Fiberlite 4-position stock (9mm SMG standard), and the M4 6-position stock (M4A1 and Mk18 mod 0 standard).

Other modifications (AR-15)

RIS quad rails package

  • Replaces the AR-15's traditional handguard with a RIS quad-rail handguard. Adds compatibility to: Foregrip, M203PI, 2 light mounts (All small and large lights, Laserlyte SCV4 and AN/PEQ-5).

Visual modifications: See here for a list of preset color schemes.

Category changes notes (AR-15)

Depending on the configuration, the weapon may change categories. The checks are done in order of priority, the topmost check being the first.

  • If the weapon has received the Low-profile sniper upper receiver, it becomes a Precision rifle.
  • If the weapon has been equipped with a Semi-auto only selector, but has failed the above checks, it becomes a Conventional rifle.
  • Any other configuration: Combat rifle.

UGL compatibility (AR-15)

The AR-15's compatibility with underbarrel grenade launcher depends on the configuration of the weapon.

  • M203 compatible: Rifle configuration, RIS quad rails NOT installed.
  • M203A1 compatible: Carbine configuration, RIS quad rails NOT installed.
  • M203PI compatible: Any configuration, RIS quad rails INSTALLED.

Kalashnikov (AK)

The Kalashnikov platform, also known as AKs, is the most recent addition to the Maze Customs, yet it is as complete and diverse as if it was there since day one. Often compared with AR-15 platform firearms, AK firearms may have slightly less affinity to customization than the Black Rifles, they are without mistake the absolute kings of durability and reliability among the Customs family, certainly capable of lasting a youkai's lifetime.

Stock AK firearms

Customization options (AK)

Stock AK rifles are of variable Classes and Weights.

Rechambering (AK)

Legacy calibers

  • 5.45x39mm (AK-74 family magazines)
  • 5.56x45mm NATO (AK-101/AK-12(223) magazines) (Custom AK 5.56 magazine, 100-round drum, weight 3)
  • 7.62x39mm (AK-47 family magazines)

Nonstandard calibers

  • 5.8x42mm (Custom AK 5.8mm magazines, capacity 30 rounds and 40 rounds - respectively, weight 1 and 2)
  • 7.92x33mm Kurz (Custom AK 7.92mm magazines, capacity 30 rounds and 40 rounds - respectively, weight 1 and 2)
  • 9x39mm (Custom AK 9mm magazines, capacity 20 rounds and 30 rounds - respectively, weight 1 and 2)

Barrel (AK)

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Receiver configurations (AK)

  • Soviet
    • Accessory compatibility: 24mm AK muzzle devices, PSO-1 (4x), PSO-3 (8x), EKP-8-02 Kobra reflex sight, GP-25 UGL, CORSAK laser sight, Bipod.
    • Makes the weapon INCOMPATIBLE with a semi/burst3/full fire selector (see below).
  • Railed
    • Accessory compatibility: Standard muzzle devices, Small scope (2x), Backup scope (3x), ACOG (4x), Redfield scope (7x), EOTech 553 reflex sight, EOTech MRDS reflex sight, Bipod, Foregrip, M203PI UGL, 2 light mounts (All small and large lights, Laserlyte SCV4 and AN/PEQ-5).
    • Fully compatible with all fire selectors.

Fire selector configurations (AK)

  • Semi-auto only
  • Semi/Full (Standard on all stock AK firearms, except the AK-12 variants)
  • Semi/Burst3/Full (Standard on all AK-12 variants)

Barrel length/Stock configurations (AK)

  • Rifle configuration: 16.3 inch barrel, fixed stock. Turns the weapon into a Class 1, Weight 18.
  • Automatic configuration: 23.2 inch barrel, fixed stock. Turns the weapon into a Class 1, Weight 26.
    • Variant: New Automatic configuration: 23.2 inch barrel, folding stock. Also turns it into a Class 1, Weight 26.
  • Paratrooper configuration: 16.3 inch barrel, folding stock. Turns the weapon into a Class 1, Weight 14.
  • Carbine configuration: 12.4 inch barrel, folding stock. Turns the weapon into a Class 2, Weight 14.
  • Subcarbine configuration: 9.6 inch barrel, folding stock. Turns the weapon into a Class 2, Weight 9.
Cosmetic stock variants (AK)

Fixed stocks:

  • Fixed full stock (Standard on AKM and AK-74)
  • Fixed LMG stock (Standard on RPK and RPK-74)

Folding stocks:

  • Under-folding wire stock ("AKMS" style, Standard on AKMSU) - Not compatible with Railed receivers
  • Side-folding full stock (Standard on AK-101)
  • Side-folding RPK stock ("RPK-74M" style)
  • Side-folding skeletal stock ("AKS-74" style, Standard on AKS-74U)
  • Side-folding adjustable stock (Standard on all AK-12 variants)
  • Side-folding LMG adjustable stock ("RPK-12" style)

Other modifications (AK)

Integrated thumbhole foregrip

  • Available for Soviet receivers only. Equips the weapon with an integrated foregrip. (Standard on the AKMSU) - NOTE: Renders the weapon incompatible with Front mount accessories.
    • There is a possibility to order an AIM-style standard foregrip handguard, in lieu of a thumbhole one. The difference is cosmetic, it is functionally the same.

Visual modifications: See here for a list of preset color schemes.

Category changes notes (AK)

Depending on the configuration, the weapon may change categories. The checks are done in order of priority, the topmost check being the first.

  • If the weapon has been equipped with a Semi-auto only selector, but has failed the above checks, it becomes a Conventional rifle.
  • If the weapon has failed the above checks and has the Automatic or New Automatic configuration, it becomes a Machine gun.
  • Any other configuration: Combat rifle.

Remington 700 (Rem 700)

Rifles based on the Remington 700 platform set the standard when it comes to bolt-action rifles, and as such it is natural that it became the relevant Customs family. Offered in a wide variety of calibers while retaining all of the advantages of this rifle family, Rem 700 firearms may not be highly customizable, but they are primarily intended for people seeking to squeeze the most out of their favorite caliber, with accuracy, reliability and dependability being the key descriptors.

Stock Rem 700 firearms

Customization options (Rem 700)

All stock Rem 700 rifles are Class 1, Weight 26.

Feeding system

Magazine well modification

  • Allows the weapon to receive external magazines, in order to extend the weapon's capacity and increase reloading speed. All relevant magazines are custom.

Rechambering (Rem 700)

Unmodified rifles (internal magazine)

Legacy calibers

Nonstandard calibers

Modified rifles (magazine well)

Nonstandard calibers

Note: All "Custom" magazines for Rem 700 rifles weigh 1 unit empty.

Barrel (Rem 700)

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Other modifications (Rem 700)

RIS dual rail package

  • Adds two side picatinny rails on the rifle's front. Adds 2 light mounts (All small and large lights, Laserlyte SCV4 and AN/PEQ-5).

Visual modifications: See here for a list of preset color schemes.

Black Arrow (BA)

Based on the Zastava M93 Black Arrow, of which it is the sole member of this peculiar family, the Black Arrow rifle platform is essentially an upscaled Mauser platform, putting emphasis on anti-matériel role. As such, the name of the game is extreme power. Again, it may not be the must customizable of families, but what it has to offer may interest those seeking a weapon suitable to destroy the biggest of targets.

Stock Black Arrow firearms

Customization options (BA)

There is only one BA rifle, the M93 Black Arrow, which is Class 1, Unsparable.

Rechambering (BA)

Legacy calibers

  • 12.7x108mm (Black Arrow 5-round magazines) (Custom extended Black Arrow magazines, capacity 10 rounds)

Nonstandard calibers

  • .408 Chey Tac (Custom BA408 5-round magazines, Custom extended BA50 10-round magazines)
  • .50 BMG (Custom BA50 5-round magazines, Custom extended BA50 10-round magazines)

Note: All "Custom" magazines for Black Arrow rifles weigh 2 units empty, unless they also bear the mention "extended"; these weigh 3 units empty.

Barrel (BA)

Barrel material change

  • See below for more information on barrel material changes.
    • NOTE: If a firearm previously equipped with a high-resistance barrel is re-chambered, an equivalent barrel will be provided free of charge, and needs not to be re-purchased.

Other modifications (BA)

Black Spear frame weight reduction program

  • Though the barrel remains unmodified to preserve accuracy, the chassis and stock are replaced with lighter materials, such as titanium and aircraft aluminium.
  • Changes the weapon weight to 30 units, and adds 2 light mounts (All small and large lights, Laserlyte SCV4 and AN/PEQ-5).

Visual modifications: See here for a list of preset color schemes.

Customizations (All types)

Barrel threading

The barrel threading service will modify a weapon so that it receives a barrel with standard threading, compatible with the majority of silencers and muzzle brakes, at the exception of a few, proprietary devices which are made to suit only certain specific firearms.

Firearms that cannot receive threading:

  • Firearms with integrated muzzle brakes or silencers which are proprietary to the host firearm, and non-removable (All firearms NOT marked with an R on this list + Norinco Type 85SD, Tula Arms VSS Vintorez and Enfield Sten Mk IIS)
  • Revolvers, multiple-barreled firearms, rocket launchers, grenade launchers
  • Crafting-only firearms
  • Specific models: Armsel Protecta, Bryco Model 38, CZ Sa vz. 26, Colt M1918 BAR, General Motors M3 Grease Gun, H&K P7M8, H&K P7M10, Hi-Point C9, Hi-Point JCP, Hi-Point JHP, IZHMASH Mosin-Nagant Obrez, IZHMASH Simonov AVS-36, Lucznik Arms PM-63 RAK, MAT-49, Mauser C96 Red 9, Mauser MG42, Sterling L2A3, Sterling Mark 7, TsNIITochMash PKP Pecheneg, Voere American-180, ZiD Sudaev PPS-43

Firearms which already have threading and thus do not need the threading service:

  • Firearms with integrated muzzle brakes or silencers which are proprietary to the host firearm, but removable (All firearms marked with an R on this list, all are compatible with standard devices)
  • Heckler & Koch MARK 23 (Standard devices)
  • Intratec TEC-9, MAC-10, MAC-11 (MAC devices)
  • Heckler & Koch MP5A3, MP5/10A3, MP5/40A2 and all Customs MP5s except if MP5SD modified (MP5 3-lug devices)
  • Colt 9mm SMG, Colt AR-15A2, Colt M16, Colt M16A1, Colt M16A2, Colt M16A4, Colt M4A1, Colt Mark 18 Mod 0 and all Customs AR-15s (Standard devices)
  • Kalashnikov AKM, Kalashnikov AK-74, Kalashnikov AK-101, Kalashnikov AKMSU, Kalashnikov AKS-74U (24mm AK devices)
  • Kalashnikov AK-12, all variants (Standard devices)

Barrel materials

Applicable to all firearms shooting pistol, rifle, and shotgun calibers.

4150 Carbon Steel barrel

  • Equipped firearm obtains the following bonuses: Maximum Condition value x1.25, Maximum Cleanliness value x1.1.
  • Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 1 pressure level lower.

4150CS barrel + Titanium Nitride (TiN) coating

  • Equipped firearm obtains the following bonuses: Maximum Condition value x2, Maximum Cleanliness value x1.25.
  • Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 2 pressure levels lower.

4150CS barrel + NP3 coating

  • Equipped firearm obtains the following bonuses: Maximum Condition value x1.25, Maximum Cleanliness value x1.5, Cleaning effectiveness x2.
    • Improved cleaning effectiveness: When using a Gun Cleaning Kit on a firearm with NP3 coating, the GCK restores up to 2000 cleanliness points instead of 1000.
  • Pistol calibers: When shooting over-pressure ammunition, negative effects are treated as those 1 pressure level lower.

Relation tables

Here are relationship tables which explain how the different improved barrels affect overpressure ammunition.

  • Wear rate relates to the amount of Condition and Cleanliness points lost per shot.
  • Critfail effects show what happens when a critical failure does happen.
Ammunition type Standard barrel 4150CS alone or + NP3 4150CS + TiN
FMJ / HP / AP Normal (Wear rate: 1 - Critfail effects: None) Normal (Wear rate: 1 - Critfail effects: None) Normal (Wear rate: 1 - Critfail effects: None)
+P / TPD / EAP As +P (Wear rate: 2 - Critfail effects: None) Normal (Wear rate: 1 - Critfail effects: None) Normal (Wear rate: 1 - Critfail effects: None)
+P+ / XPD / XAP As +P+ (Wear rate: 4 - Critfail effects: -2000 condition) As +P (Wear rate: 2 - Critfail effects: None) Normal (Wear rate: 1 - Critfail effects: None)
+P++ As +P++ (Wear rate: 8 - Critfail effects: -8000 condition) As +P+ (Wear rate: 4 - Critfail effects: -2000 condition) As +P (Wear rate: 2 - Critfail effects: None)
  • NOTE: Damage modifiers, recoil, and loudness (+P++ makes silencers useless) are NOT affected regardless of the barrel used.

Visual modifications

A wide selection of pre-set color schemes and cosmetic personalization services are available for every Customs family, and are less expensive than a completely custom job.

All firearms are eligible for visual modifications.

Services

  • Weapon naming, via a direct engraving or the application of a thin metallic name tag.
  • Paintjob, using a preset color scheme or pattern.
  • Custom paintjob, using a color scheme described and ordered by the client.

1911SS and 1911DS color schemes

  • The Vega: Nickel frame and slide, pearl grips
  • The Sin: Nickel frame and slide, wood grips
  • The Heat: Blued frame and slide, ivory grips
  • Silverballer: Stainless frame and slide, wood+Pachmayr grips
  • The Face/Off: Golden frame and slide, black ivory grips with custom gold-colored lions engraved
  • El Jefe: Nickel frame and slide, Green-white-red (Mexican flag) colored wood grips
  • DF Warrior: Tan frame and slide, white polymer grips
  • Expert: Black frame and slide, black polymer grips
  • The Expendable: Carbon steel black frame and slide, ebony wood grips

Blackhawk color schemes

  • Harley: Blued frame, wood grip
  • Marlboro: Stainless frame, wood grip
  • Single 6: Stainless frame, pearl grip
  • Vaquero: Case colored frame, black grip

L-Frame color schemes

  • Dirty: Blued frame, dark wood grip
  • Texas Ranger: Nickel frame, wood grip

Glock color schemes

  • Earl Jr.: Black frame, stainless slide
  • Olive: Olive drab (OD) frame, black slide
  • Paradox: Blue frame, black slide
  • Scarlet: Black frame, red slide
  • Deadly rose: Black frame, pink slide

MP5 color schemes

  • iKoch: White frame, white stock, white handguards
  • Flagship: Black stock, red frame, yellow handguards

AR-15 color schemes

  • Checkpoint: Black receiver, wooden pistol grip, wooden stock, wooden handguard
  • C7: Black receiver, OD green pistol grip, OD green stock, OD green handguard
  • LaFrance: Brass receiver, black pistol grip, brass stock, black handguard
  • Nordic: White receiver, white pistol grip, white stock, white handguard
  • Snake Custom: Black receiver, tan pistol grip, tan stock, black handguard

AK color schemes

  • Wood: Dark grey receiver, wooden pistol grip, wooden stock, wooden handguard
  • Composite: Dark grey receiver, black pistol grip, black stock, black handguard
  • Lord of War: Golden receiver, wooden pistol grip, golden stock, wooden handguard
  • Soprano: Nickel receiver, ivory pistol grip, nickel stock, ivory handguard

Rem 700 color schemes

  • Police: Black stock and frame
  • New Marine: Flat dark earth (FDE) stock and frame

Black Arrow color schemes

  • Blood Knight: Dark red stock and receiver, black barrel

Camouflage patterns (all families)

  • 5.11 Digital pattern
  • Choco-chip, original
  • DPM, 1985 original
  • DPM, dark marine
  • DPM, desert
  • DPM, marine
  • DPM, urban
  • Flecktarn, 1993 original
  • Flecktarn, desert
  • Flecktarn, M/84 forest
  • Flecktarn, urban
  • Klyaksa pattern (arctic)
  • Lizard pattern, original
  • Lizard pattern, urban
  • Lizard pattern, red'
  • M05 "Lumipuku", snow
  • M1942, original "Duck Hunter"
  • M1942, "Aegean" pattern
  • M1942, Iran desert variant
  • M1948 ERDL, original "Leaf pattern"
  • MARPAT, desert
  • MARPAT, woodland
  • Parsley leaf pattern
  • Schneetarn pattern
  • Serbian PTJ digital, urban
  • Splinter pattern
  • Tiger stripe, original
  • Tiger stripe, dense
  • Tiger stripe, desert DF pattern
  • Type 07 digital, marine
  • Woodland, original M81
  • Woodland, urban RF pattern

Wood finishes

Intended for wooden parts on AKs, AR-15s, 1911SS/DS and Rem700s, and any other firearm using wood, as a form of color scheme modification.
All wood used in firearms is laminated. The default wood type used is not specified but is implied to be some form of pinewood.
Finishes available employ some form of staining or wood finishing process to achieve a different color.

  • Burgundy
  • Cherry tree
  • Cinnamon
  • Dark walnut
  • Driftwood
  • Ebony
  • Hunter green
  • Ipswich pine
  • Ocean
  • Oriental red
  • Pickled oak
  • Provincial
  • Red mahogany
  • Red oak
  • Riverstone
  • Rosewood
  • Royal mahogany
  • Sedona
  • Terracotta
  • Verdigris
  • Walnut
  • Weathered oak
  • Winter moss

See also

Retrieved from "http://old.mazeworld.net/wiki/Customs:Weapons"