Accessory compatibility list (no ontology)

From Mazeworld

(Difference between revisions)
(→Front mount accessories)
(→Front mount accessories)
Line 364: Line 364:
* [[Walther WA2000]] - 10x scope
* [[Walther WA2000]] - 10x scope
-
= Front mount accessories =  
+
= Underbarrel accessories =  
As explained [[Weapon accessory#Front mount accessories|here]], in order for a weapon to mount a Front accessory, the firearm must possess an Underbarrel rail (shortened as URail).
As explained [[Weapon accessory#Front mount accessories|here]], in order for a weapon to mount a Front accessory, the firearm must possess an Underbarrel rail (shortened as URail).

Revision as of 14:55, 27 June 2016

This page lists which weapon accessories are compatible with which weapons. It will also list their prices when sold in the appropriate shops.

  • NOTE: Certain feeding accessories are marked with a (WT+1) tag: this denotes that when equipped to a weapon, the equipped weapon's Weight tier increase by 1 (e.g. from Weight 9 to Weight 14, or Weight 2 to Weight 3, etc.)
    • Additional conditions may also be listed for certain special cases.

Muzzle accessories

Silencers

Silencers are classified and named after the power group and rough bore size OR proprietary attachment point they're compatible with. If the firearm is of a suitable caliber and has a threaded barrel with no muzzle accessories mounted, then it is compatible. Reminder: Many firearms can be modified at the Maze Customs to receive a threaded barrel, and a select few are pre-threaded.

The threading type required is listed in the name; either Standard, or one of the proprietary types, for which a separate device is required even if the caliber would otherwise match. For example, a standard Pistol .45 suppressor will not fit on a MAC-10; it requires a MAC device silencer.

Standard silencers

Proprietary silencers

Proprietary devices fit certain, special threadings or mounting systems, regardless of the caliber of the host weapons.

  • Silencer, MAC device - 250 P$
    • Compatible with: Firearms with MAC threading (MAC-10, MAC-11, Tec-9)
  • Silencer, MP5 3-lug device - 350 P$
    • Compatible with: Firearms with 3-lug system (H&K MP5A3, MP5/40A2, MP5/10A3, UMP-9, UMP-40 and UMP-45 + all Customs MP5 except with MP5SD modification.)
  • Silencer, AK device - 350 P$
    • Compatible with: Firearms with AK mounting system (AKM, AK-74, AK-101, AKMSU, AKS-74U, AEK-971, AEK-972, AEK-973 + all Customs AKs with Soviet receiver.)
  • Silencer, MP9 device - 300 P$
    • Compatible with: Firearms with MP9 lug system (B&T MP9)

Integrated silencers

Integrated silencers refer to silencers that are part of the barrel and impossible to remove, being an integral part of a weapon.

Class 1 weapons

Class 2 weapons

Muzzle brakes

Muzzle brakes, much like silencers, are classified and named after the power group and rough bore size OR proprietary attachment point they're compatible with. If the firearm is of a suitable caliber and has a threaded barrel with no muzzle accessories mounted, then it is compatible. Reminder: Many firearms can be modified at the Maze Customs to receive a threaded barrel, and a select few are pre-threaded.

The threading type required is listed in the name; either Standard, or one of the proprietary types, for which a separate device is required even if the caliber would otherwise match. For example, a standard Rifle .22 brake will not fit on an AK-101; it requires a 24mm AK device brake.

Standard brakes

Proprietary brakes

Proprietary devices fit certain, special threadings or mounting systems, regardless of the caliber of the host weapons.

  • Muzzle brake, MAC device - 200 P$
    • Compatible with: Firearms with MAC threading (MAC-10, MAC-11, Tec-9)
  • Muzzle brake, MP5 3-lug device - 300 P$
    • Compatible with: Firearms with 3-lug system (H&K MP5A3, MP5/40A2, MP5/10A3, UMP-9, UMP-40 and UMP-45 + all Customs MP5 except with MP5SD modification.)
  • Muzzle brake, 24mm AK device - 350 P$
    • Compatible with: Firearms with 24mm threading (Kalashnikov AKM, AK-74, AK-101, AKMSU, AKS-74U and all Customs AKs with Soviet receiver.)

Integrated muzzle brakes

Integrated muzzle brakes refer to muzzle brakes that are either integral to the weapon and impossible to remove, or are removable (e.g. for installing a silencer instead) but remain proprietary to this firearm. For coherence purposes, when a silencer is equipped on any of those firearms (if they can accept one), the proprietary muzzle brake is removed and placed inthe inventory. Concerned weapons are marked with a R (for "removable") tag.

Removable proprietary muzzle brakes have a value of 0 P$ and a weight of 1 unit, and only fit on the firearm model it was designed for.
Firearms with removable proprietary muzzle brakes all use Standard threading for the purposes of mounting other muzzle accessories.

Class 1 weapons

Class 2 weapons

Class 3 weapons

Bayonets

There are 26 bayonets in MazeWorld. Compatible weapons that are marked (NB) means "Non-Blocking", which means mounting a bayonet on this firearm will not block mounting an UGL.

Optics

As explained here, in order for a weapon to mount an optic, it must have an optic mount. Thus, this list will detail which firearms have which optic mount types.

Weapon names listed with a "standard optic" denotes that this weapon is meant to come stock with the listed optic model; i.e. it will always be found with this accessory when bought new in a shop, for example.

Weapons with NATO rail mounts

Standard length [NATO]

Short length [NATO-S]

Weapons with WP side mounts

Standard length [WP]

Short length [WP-S]

Weapons with HK claw mounts

Standard length [HK]

Short length [HK-S]

Weapons with QBZ mounts

Weapons with G43 mounts

Weapons with integrated optics

Certain weapons come with non-removable optics designed solely for the weapon they are mounted on.

Underbarrel accessories

As explained here, in order for a weapon to mount a Front accessory, the firearm must possess an Underbarrel rail (shortened as URail).

Bipods

The universal bipod costs 250 P$. These bipods may be mounted on certain firearms. In rare occasions, the universal bipod will be part of certain stock firearms. Many other firearms may also come with their own, integrated (and thus non-removable) bipods.

Compatible with the bipod

Integrated bipods

Class 1 weapons

Foregrips

The universal foregrip costs 250 P$. Just like with bipods, they may be mounted on certain firearms, and certain other weapons may come with their own, integrated foregrips.

Compatible with the foregrip

Integrated foregrips

Underbarrel Grenade Launchers (UGL)

There are 9 UGLs available in Mazeworld. Compatible weapons will be listed under each of them.

  • (WT+1) ; All underbarrel grenade launchers increase the equipped weapon's Weight tier by 1.

FN GL1

The GL1 is specially designed to be mounted on the F2000.
Cost: 750 P$
Caliber: 40mm NATO grenade

Weapons compatible with the GL1

GP-30

The GP-30 is the grenade launcher specifically designed to be mounted on AK rifles and weapons with similar mounts.
Cost: 600 P$
Caliber: 40mm caseless grenade

Weapons compatible with the GP-30

M203

The M203 is a grenade launcher designed for the AR-15 family of rifles. It is equipped with a 12 inch barrel. To install the launcher, part or totality of the handguards must be removed, and the launcher clamps mated to the barrel. Comes with optional grenade launcher handguards which appear on Rifle configuration weapons. The M203 is compatible with any AR-15 variant with Carbine or Rifle configuration. Cost: 650 P$
Caliber: 40mm NATO grenade

Weapons compatible with the M203

M203PI

The M203PI package is similar to the M203 but is mounted on rails rather than mated to the barrel directly, making it easier to attach on a certain amount of weapons, including non-AR-15 variants. Cost: 650 P$
Caliber: 40mm NATO grenade

Weapons compatible with the M203PI

Heckler ＆ Koch AG36

The AG36 is designed to be used on the full-length G36 and the L85A2 only. The AG36 is mated with its own handguards, which replace the existing ones on the compatible rifles.
Cost: 750 P$
Caliber: 40mm NATO grenade

Class 1 weapons compatible

Heckler ＆ Koch HK79

The HK79 is designed to be used on the G3 rifle and certain of its derivatives. The HK79 is mated with its own handguards, which replace the existing ones on the compatible rifles.
Cost: 700 P$
Caliber: 40mm NATO grenade

Class 1 weapons compatible

SIG Sauer GL5040

The GL1 is specially designed to be mounted on the full-length SG550.
Cost: 600 P$
Caliber: 40mm NATO grenade

Class 1 weapons compatible

Underbarrel ShotGuns (USG)

There are 2 USGs available in MazeWorld. Compatible weapons will be listed under each of them.

  • (WT+1) ; All underbarrel shotguns increase the equipped weapon's Weight tier by 1.

KAC Masterkey

The Masterkey is a cut-down Remington 870 pump-action shotgun mated to an M203A1-type mount. Much like an M203, to install the Masterkey, part or totality of the handguards must be removed, and the launcher clamps mated to the barrel. In addition to the listed weapons, the Masterkey is also compatible with any Customs AR-15 with Carbine or Rifle configuration.

Cost: 600 P$
Caliber: 12 gauge
Capacity: 3, +1 Maintenance values: DV+5, RV+5

Class 1 weapons compatible

M26 MASS

The M26 MASS is an unique magazine-fed, straight pull bolt-action shotgun that can be mounted to underbarrel accessory rails. Much like an M203, to install the M26 MASS, part or totality of the handguards must be removed, and the launcher clamps mated to the barrel. In addition to the listed weapons, the M26 MASS is also compatible with any Customs AR-15 with Carbine or Rifle configuration.

Cost: 1100 P$
Caliber: 12 gauge
Capacity: M26 MASS magazines, +1. Maintenance values: DV+2, RV+2

Class 1 weapons compatible

Light mount accessories

As explained in this section, accessories in this category are primarily differentiated by size; Small and Large.

All accessories of the same size tier can fit on the same weapons. In addition, all Small accessories will fit on weapons with Large light mounts. The only exception is the AN/PEQ-6 dual module, which fits on neither rail type (Small or Large).

Rail adapters

More information: Weapon accessory#Rail adapters

Small mounts

Accessories compatible on a Small light mount:

  • Light, Surefire X300U - 200 P$
  • Light, Inforce APL - 150 P$
  • Laser, Laserlyte SCV4 - 200 P$

Weapons with Small mounts

Large mounts

Accessories compatible on a Large light mount:

  • All Small mount accessories
  • Light, Surefire M620 - 300 P$
  • Light, P3X Fury Tactical - 450 P$
  • Light, Inforce WML - 250 P$
  • Laser, AN/PEQ-5 - 300 P$

Weapons with Large mounts

Special

Unique light mount accessories:

  • Dual, AN/PEQ-6 - 350 P$

AN/PEQ-6

Cost: 350 P$

Weapons compatible with the AN/PEQ-6

Integrated light mount accessories

  • Ruger LCR CT - Integrated laser sight, 100 turns max battery life

Feeding accessories

There is a large variety of feeding accessories available in Mazeworld. Information shown about them lists empty weight, cost, and for the majority of items, a size tier.

The price listed for all items implies they are empty; exception for ammunition belts, which are sold full - as such the prices listed for ammo belts implies they are full. The weight of the belts when full is also shown, for consistency.

Size tiers are relevant for Load-bearing gear and particularly ammo pouches, which may have limitations on maximum magazine size they can carry. Size tiers only applies to magazines and stripper/en-bloc clips. Speed strips, speedloaders/moonclips and ammunition belts do not have size tiers.

Empty weight Size tier
0.25 Tiny
0.5 Small
1 Medium
1.2 Large
2 V.Large
3 X.Large

Speed strips

Speed strips are strips of flexible rubber designed to hold revolver ammunition. They fulfill the purpose of speedloaders but for single-action revolvers, by allowing faster reloading than from loose rounds. Unlike speedloaders, which are similar to magazines in that they fit to only one model, speed strips are tied to the caliber of the cartridges they hold - and as such, tied to the weapon's caliber.

Any speed strip of any capacity can be used to reload any single-action revolver, so long as the weapon's caliber matches (or is compatible with) the ammunition in the speed strip. Don't forget that if the capacity of speed strip and weapon do not match, the weapon may not be reloaded to full, or the speed strip will still be holding ammunition after reloading.

All speed strips weigh 0.25 units.

Speedloaders

Speedloaders are objects designed to drop in fresh rounds inside cylinder revolvers, much quicker than with loose rounds by hand. They are standardized by cylinder size and caliber. They are primarily designed for double-action revolvers, which can have their cylinders swung out of the frame - the only way for a speedloader to do its job and access all the chambers at once.

A speedloader can be used to reload any double-action revolver ("Semi-auto" in the event line), as long as capacity matches (6-round speedloader -> 6-shot cylinder) and ammunition loaded in the speedloader is compatible with that of the weapon.

  • Example: A .357/.38 speedloader can hold either .357 Magnum ammo, .38 Special ammo, or a combination of both.
    • If the speedloader is loaded with only .38 Special ammo it can be used to reload either .357 or .38 revolvers.
    • If loaded with only .357 Magnum, or a mixture of both, it can only be used in .357 revolvers since .357 ammo does not fit into .38 revolvers.

A special sub-type of speedloader exists: it is called a Moonclip. Moonclips differ from speedloaders in that they're designed to hold rimless ammunition, which would otherwise fall through a revolver cylinder. Moonclips differ slightly from speedloaders in terms of use. Unlike speedloaders and speed strips, which dump (transfer) the ammo they hold into the weapon, moonclips function a little more like box magazines: they are inserted inside the cylinder loaded, the weapon holds the moonclip.

All speedloaders and moonclips weigh 0.25 units.

Ammunition belts

Ammunition belts are special feeding accessories. Like many magazines, they belong to certain families, and certain weapons can only use and fire belts of a given family. The caliber, list of compatible weapons (and belt size they come standard with), empty and full weights, belt sizes and price per belt size are listed along with each of the belt families.

STANAG magazine family

  • STANAG 20-round - 85 P$, Weight 1
  • STANAG 30-round - 100 P$, Weight 1
  • STANAG 60-round casket - 290 P$, Weight 2
  • STANAG 100-round C-MAG - 600 P$, Weight 3 (WT+1)

Class 1 weapons compatible

Class 2 weapons compatible

AK-47 magazine family

  • AK-47 30-round - 90 P$, Weight 1.2
  • AK-47 40-round RPK - 135 P$, Weight 2
  • AK-47 75-round drum - 470 P$, Weight 3 (WT+1)

Class 1 weapons compatible

Class 2 weapons compatible

AK-74 magazine family

  • AK-74 30-round - 100 P$, Weight 1
  • AK-74 45-round RPK-74 - 145 P$, Weight 2
  • AK-74 60-round casket - 225 P$, Weight 2
  • AK-74 95-round drum - 540 P$, Weight 3 (WT+1)

Class 1 weapons compatible

Class 2 weapons compatible

Other weapons

Magazines, clips, and feeding systems for all other weapons not listed above, can be found below.

A
B
  • Barrett M82A1M
    • M82 10-round magazine - 265 P$, weight 2
  • Barrett M98B
    • M98B 10-round magazine - 210 P$, weight 1
  • Beretta 8045 Cougar
    • Cougar 8-round magazine - 25 P$, weight 0.25
  • Beretta 81FS
    • 81 series 12-round magazine - 25 P$, weight 0.5
  • Beretta 84FS
    • 84 series 13-round magazine - 20 P$, weight 0.5
  • Beretta 92 series: Beretta M9 and Beretta 93R
    • 92 series 15-round magazine - 25 P$, weight 0.5
    • 92 series 20-round extended magazine - 40 P$, weight 0.5
  • Beretta 96FS
    • 96 series 11-round magazine - 25 P$, weight 0.5
    • 96 series 15-round extended magazine - 40 P$, weight 0.5
  • Beretta Px4 Storm
    • Px4 Storm 14-round magazine - 35 P$, weight 0.5
    • Px4 Storm 17-round extended magazine - 70 P$, weight 0.5
  • Bersa Thunder 380 Super
    • Bersa 380 15-round magazine - 25 P$, weight 0.5
  • Bersa Thunder 40 PRO
    • Bersa 40 13-round magazine - 25 P$, weight 0.5
  • Benelli R1
    • Benelli R1 3-round magazine - 90 P$, weight 0.5
  • Blaser R93 LRS2
    • R93 4-round magazine - 150 P$, weight 1
  • Browning BLR
    • Browning BLR 4-round magazine - 105 P$, weight 1
  • Bryco Model 83
    • Bryco .380 6-round magazine - 8 P$, weight 0.25
  • BSA Lewis Gun
    • Lewis Gun 47-round pan magazine - 180 P$, weight 2
    • Lewis Gun 97-round extended pan magazine - 540 P$, weight 3 (WT+1)
C
D
E
  • Enfield Bren Gun
    • Bren Gun 30-round magazine - 160 P$, weight 2
    • Bren Gun 100-round pan magazine - 480 P$, weight 3 (WT+1)
  • Enfield M1917
    • M1917 5-round stripper clip - 50 P$, weight 0.25
  • Short-Magazine Lee Enfield series: Enfield SMLE No.4 Mk.I
    • SMLE 5-round stripper clip - 50 P$, weight 0.25
      • NOTE: The compatible weapons have a capacity of 10 rounds; two full stripper clips are needed to reload from empty.
  • Enfield Sten Mark IIS
    • Sten 32-round magazine - 105 P$, weight 0.5
  • Erma Werke MP40
    • MP40 32-round magazine - 65 P$, weight 0.5
    • MP40 64-round extended magazine - 140 P$, weight 1.2
  • Excel Arms Accelerator MP-5.7
    • Accelerator 9-round magazine - 30 P$, weight 0.25
F
  • FN Browning Hi-Power
    • Hi-Power 13-round magazine - 30 P$, weight 0.5
    • Hi-Power 20-round extended magazine - 60 P$, weight 0.5
  • FAL series: FN FAL 50.00, DSA SA58 FAL OSW, DSA SA58 FAL SPR
    • FAL 10-round magazine - 70 P$, weight 1
    • FAL 20-round magazine - 115 P$, weight 1.2
    • FAL 30-round extended magazine - 180 P$, weight 1.2
    • FAL 100-round C-MAG - 700 P$, weight 3 (WT+1)
  • FN Five-seveN
    • Five-seveN 20-round magazine - 50 P$, weight 0.5
    • Five-seveN 30-round extended magazine - 100 P$, weight 0.5
  • FN FNP-40
    • FNP-40 14-round magazine - 40 P$, weight 0.5
  • FN FNP-45
    • FNP-45 15-round magazine - 55 P$, weight 0.5
  • FN P90
    • P90 50-round magazine - 100 P$, weight 1.2
  • FN SCAR-H
    • SCAR-H 10-round magazine - 70 P$, weight 1
    • SCAR-H 20-round magazine - 155 P$, weight 1.2
    • SCAR-H 30-round magazine - 310 P$, weight 1.2
  • Franchi SPAS-15
    • SPAS-15 6-round magazine - 110 P$, weight 1.2
G
  • M1 Carbine series: General Motors M1 Carbine, General Motors M2 Carbine, Advanced Combat Systems Hezi SM-1
    • M1 Carbine 15-round magazine - 70 P$, weight 0.5
    • M1 Carbine 30-round magazine - 100 P$, weight 1
  • General Motors M3 'Grease Gun'
    • M3 30-round magazine - 70 P$, weight 0.5
  • GIAT FAMAS G1
    • FAMAS 25-round magazine - 130 P$, weight 1
  • Glock .380 series: Glock 25, Glock 28
    • Glock .380 10-round magazine - 20 P$, weight 0.25 (Only compatible with Glock 28)
    • Glock .380 15-round magazine - 25 P$, weight 0.5 (Not compatible with Customs Glock-SF .380 pistols. WT+1 when equipped to a Glock 28.)
  • Glock .40/.357 series: Glock 22, Glock 27, Glock 31, Glock 33
    • Glock .40/.357 10-round magazine - 30 P$, weight 0.25 (Only compatible with Glock 27 or Glock 33)
    • Glock .40/.357 15-round magazine - 40 P$, weight 0.5 (WT+1 when equipped to a Glock 27 or Glock 33)
    • Glock .40/.357 22-round extended magazine - 80 P$, weight 0.5 (WT+1 when equipped to a Glock 27 or Glock 33)
  • Glock .45 series: Glock 21, Glock 30, KRISS Vector
    • Glock .45 10-round magazine - 30 P$, weight 0.25 (Only compatible with Glock 30)
    • Glock .45 13-round magazine - 35 P$, weight 0.5 (WT+1 when equipped to a Glock 30)
    • Glock .45 30-round magazine - 75 P$, weight 0.5 (WT+1 when equipped to a Glock 30)
  • Glock 9mm series: Glock 17, Glock 18C, Glock 26
    • Glock 9mm 10-round magazine - 20 P$, weight 0.25 (Only compatible with Glock 26)
    • Glock 9mm 17-round magazine - 30 P$, weight 0.5 (WT+1 when equipped to a Glock 26)
    • Glock 9mm 33-round magazine - 60 P$, weight 0.5 (WT+1 when equipped to a Glock 26)
  • Glock 10mm series: Glock 20, Glock 29
    • Glock 10mm 10-round magazine - 45 P$, weight 0.25 (Only compatible with Glock 29)
    • Glock 10mm 15-round magazine - 55 P$, weight 0.5 (WT+1 when equipped to a Glock 29)
H
I
J
  • Joshua
    • Unknown .454 Casull 7-round magazine - 500 P$, weight 0.25
K
  • KBP 9A91
    • 9A91 20-round magazine - 170 P$, weight 1.2
  • KBP OSV-96
    • OSV-96 5-round magazine - 240 P$, weight 2
  • KBP OTs-02 Kiparis
    • Kiparis 20-round magazine - 55 P$, weight 0.5
    • Kiparis 30-round extended magazine - 95 P$, weight 0.5
  • KBP OTs-33 Pernach
    • Pernach 18-round magazine - 35 P$, weight 0.5
    • Pernach 27-round extended magazine - 55 P$, weight 0.5
  • KBP PP-2000
    • PP-2000 20-round magazine - 80 P$, weight 0.5
    • PP-2000 44-round magazine - 160 P$, weight 1
L
M
  • M26 MASS underslung shotgun
    • M26 MASS 5-round magazine - 80 P$, weight 1
    • M26 MASS 10-round magazine - 160 P$, weight 1.2
  • MAC-10
    • MAC-10 30-round magazine - 55 P$, weight 0.5
  • MAC-11
    • MAC-11 32-round magazine - 35 P$, weight 0.5
  • MAS 49/56
    • MAS-49/56 10-round magazine - 80 P$, weight 1
  • MAT-49
    • MAT-49 32-round magazine - 65 P$, weight 0.5
  • Mateba MTR-8
    • MTR-8 8-round en-bloc clip - 30 P$, weight 0.25
  • Mauser C96 Red 9
    • C96 Red 9 stripper clip - 30 P$, weight 0.25
  • Mauser Karabiner 98k
    • Kar98k 5-round stripper clip - 65 P$, weight 0.25
  • Mauser SR-93
    • SR-93 6-round magazine - 165 P$, weight 1
  • McMillan Tac-50
    • Tac-50 5-round magazine - 230 P$, weight 2
  • Molot Plant Stechkin APS
    • Stechkin 20-round magazine - 35 P$, weight 0.5
  • MPS AA-12
    • AA-12 8-round magazine - 140 P$, weight 1.2
    • AA-12 20-round drum, - 280 P$, weight 2
N
P
R
  • Rheinmetall FG42
    • FG42 20-round magazine - 140 P$, weight 1.2
  • RPC Fort Fort-12
    • Fort-12 12-round magazine - 35 P$, weight 0.5
  • Ruger 10/22
    • 10/22 10-round magazine - 40 P$, weight 0.25
    • 10/22 25-round BX-25 magazine - 80 P$, weight 1
    • 10/22 50-round drum - 120 P$, weight 2
  • Ruger Mini-14 series: Ruger AC556
    • Mini-14 30-round magazine - 160 P$, weight 1
  • Ruger Mark III
    • Mark III 10-round magazine - 15 P$, weight 0.25
  • Ruger Mini-30
    • Mini-30 5-round magazine - 90 P$, weight 0.5
    • Mini-30 30-round extended magazine - 160 P$, weight 1
  • Ruger MP9
    • MP9 32-round magazine - 100 P$, weight 0.5
S
T
V
W
Z

See also

Retrieved from "http://old.mazeworld.net/wiki/Accessory_compatibility_list"